Embedded System Module - Revision history

KMaster888: /* See also */ add

2024-12-03T00:14:36Z

Szagory: Added caption to image. Replaced "card's availability" with "serviceability".

2024-07-26T09:50:40Z

Added caption to image. Replaced "card's availability" with "serviceability".

← Previous revision		Revision as of 09:50, 26 July 2024
Line 1:		Line 1:
	[[File:Toradex_Colibri_T30_Computer_On_Module.jpg\|thumb\|right]]		[[File:Toradex_Colibri_T30_Computer_On_Module.jpg\| [[Nvidia]] Toradex Colibri T30 [[computer-on-module]] ([[System on a chip\|system-on-chip]]) board\|thumb\|right]]
	'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.		'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.

	If the ESM module is plugged on a carrier, it relies on the standard [[PCI bus]] as a board-to-board interface. In this case two connectors create a link to the carrier. While the "J1" connector provides a specified PCI connection, the "J2" connector brings I/O signals from the ESM module to the carrier, which then includes all necessary connectors. The signal assignment of J2 is not fixed but can be completely customized, although there are reserved pins for a 64-bit PCI bus interface. A third connector, "J3", is used for additional I/O signals if the ESM module has no front I/O. The signal assignment of this connector is fixed to support a special set of I/O functions.		If the ESM module is plugged on a carrier, it relies on the standard [[PCI bus]] as a board-to-board interface. In this case two connectors create a link to the carrier. While the "J1" connector provides a specified PCI connection, the "J2" connector brings I/O signals from the ESM module to the carrier, which then includes all necessary connectors. The signal assignment of J2 is not fixed but can be completely customized, although there are reserved pins for a 64-bit PCI bus interface. A third connector, "J3", is used for additional I/O signals if the ESM module has no front I/O. The signal assignment of this connector is fixed to support a special set of I/O functions.

	A large part of the I/O functions on ESMs are often controlled by an onboard [[FPGA]] component (field-programmable gate array) so that every module can easily be tailored to a specialized application through user-defined functions. Such functions are loaded into the FPGA as [[Semiconductor intellectual property core\|IP cores]]. Using FPGAs also reduces dependence on special controller chips which may become obsolete, thus extending the card's ~~availability~~.		A large part of the I/O functions on ESMs are often controlled by an onboard [[FPGA]] component (field-programmable gate array) so that every module can easily be tailored to a specialized application through user-defined functions. Such functions are loaded into the FPGA as [[Semiconductor intellectual property core\|IP cores]]. Using FPGAs also reduces dependence on special controller chips which may become obsolete, thus extending the card's serviceability.

	ESMs are typically used on boards for [[CompactPCI]] and [[VMEbus]] as well as [[single-board computer]]s for embedded applications. A company standard by MEN Micro, a manufacturer of embedded computers, specifies the ESM concept and the different types of modules. The ESM specification defines one form factor for the printed circuit board: {{convert\|149\|xx\|71\|mm\|in\|1\|abbr=on}}.		ESMs are typically used on boards for [[CompactPCI]] and [[VMEbus]] as well as [[single-board computer]]s for embedded applications. A company standard by MEN Micro, a manufacturer of embedded computers, specifies the ESM concept and the different types of modules. The ESM specification defines one form factor for the printed circuit board: {{convert\|149\|xx\|71\|mm\|in\|1\|abbr=on}}.

	Depending on the processor type, most ESM modules have heat sinks and can be operated in wide temperature ranges up to -40 to +85 °C.		Depending on the processor type, most ESM modules have [[heat sinks]] and can be operated in wide temperature ranges up to -40 to +85 °C.

	A mechanical specialty of ESM modules is that their connectors are compatible with the [[PCI-104]] module standard. These modules can be "stacked" onto ESM modules, e. g., for additional peripheral interfaces.		A mechanical specialty of ESM modules is that their connectors are compatible with the [[PCI-104]] module standard. These modules can be "stacked" onto ESM modules, e. g., for additional peripheral interfaces.

InternetArchiveBot: Rescuing 0 sources and tagging 1 as dead.) #IABot (v2.0.9.5

2024-03-06T10:04:58Z

Rescuing 0 sources and tagging 1 as dead.) #IABot (v2.0.9.5

← Previous revision		Revision as of 10:04, 6 March 2024
Line 17:		Line 17:

	== References ==		== References ==
	*Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification], MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.		*Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification]{{Dead link\|date=March 2024 \|bot=InternetArchiveBot \|fix-attempted=yes }}, MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.

	{{Computer form factors}}		{{Computer form factors}}

Ck263: /* top */Added image #suggestededit-add-image-top

2023-12-01T13:47:48Z

top: Added image #suggestededit-add-image-top

← Previous revision		Revision as of 13:47, 1 December 2023
Line 1:		Line 1:
			[[File:Toradex_Colibri_T30_Computer_On_Module.jpg\|thumb\|right]]
	'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.		'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.

Maxtremus: /* See also */+Embedded system

2023-10-01T17:48:13Z

Frietjes at 12:48, 5 June 2019

2019-06-05T12:48:47Z

← Previous revision		Revision as of 12:48, 5 June 2019
Line 1:		Line 1:
⚫	{{Computer form factors}}
	'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.		'''Embedded System Module''', or ESM, is a compact [[computer-on-module]] (COM) standard. An ESM module typically includes a CPU processor, memory, module-specific I/O interfaces and a number of basic front I/O connectors. They can be plugged on a carrier board or be used as a stand-alone processor card.

Line 18:		Line 17:
	*Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification], MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.		*Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification], MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.

		⚫	{{Computer form factors}}
	[[Category:Motherboard form factors]]		[[Category:Motherboard form factors]]

At tuor: Undid revision 770418114 by Jeepcoon (talk)

2017-04-30T16:01:18Z

Undid revision 770418114 by Jeepcoon (talk)

@@ Line 12: / Line 12: @@
 A mechanical specialty of ESM modules is that their connectors are compatible with the [[PCI-104]] module standard. These modules can be "stacked" onto ESM modules, e. g., for additional peripheral interfaces.
-==Relative products==
+== See also ==
 * [[Computer-on-module]]
-== References==
+== References ==
 *Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification], MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.

At tuor: Undid revision 770575337 by Jeepcoon (talk)

2017-04-30T16:00:55Z

Undid revision 770575337 by Jeepcoon (talk)

← Previous revision		Revision as of 16:00, 30 April 2017
Line 26:		Line 26:
	! scope="col"\| operating system		! scope="col"\| operating system
	\|-		\|-
	\| [http://www.myirtech.com/list.asp?id=525 MYC-C7Z010/20 CPU Module] \|\| MYIR \|\| ARM Cortex-A9 Xilinx XC7Z010/20 ~~processors~~\|\| 667MHz \|\|1GB DDR3 SDRAM \|\|4GB eMMC, 32MB QSPI Flash \|\| 75 x 55mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|Gigabit Ethernet,USB OTG,Serial ports,I2C,CAN ~~and~~ SPI\|\|Linux		\| [http://www.myirtech.com/list.asp?id=525 MYC-C7Z010/20 CPU Module] \|\| MYIR \|\| ARM Cortex-A9 Xilinx XC7Z010/20\|\| 667MHz \|\|1GB DDR3 SDRAM \|\|4GB eMMC, 32MB QSPI Flash \|\| 75 x 55mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|Gigabit Ethernet,USB OTG,Serial ports,I2C,CAN,SPI\|\|Linux
	\|-
	\| [http://www.myirtech.com/list.asp?id=535 MYC-C437X CPU Module] \|\| MYIR \|\| ARM Cortex-A9 TI AM437x processors\|\| Up to 1GHz \|\|512MB DDR3 SDRAM \|\|4GB eMMC Flash, 32KB EEPROM\|\|60 x 45mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|USB,Serial ports, I2C,CAN,SPI,ADC and SDIO\|\|Linux
	\|-
	\| [http://www.myirtech.com/list.asp?id=475 MYC-IMX28X CPU Module] \|\| MYIR \|\| Freescale I.MX28 Series ARM926EJ-S Processors\|\|454MHz\|\|128MB DDR2 SDRAM \|\|256MB Nand Flash, 128KB SPI Flash\|\|62 x 38mm\|\|-40~85 Celsius (industrial grade)\|\|Ethernet,USB,Serial ports,I2C,SPI,ADC,PWM and SDIO\|\|Linux
	\|-
	\| [http://www.myirtech.com/list.asp?id=539 MYC-JA5D4X CPU Module] \|\| MYIR \|\|Atmel SAMA5D42/44 ARM Cortex-A5 Processorss\|\|600MHz\|\|512MB DDR2 SDRAM \|\|512MB Nand Flash, 4MB Data Flash, 64KB EEPROM\|\|67.60 x 45.00mm\|\|-40~85 Celsius (industrial grade)\|\|Ethernet,TWI,SPI,SMD,SDIO,etc\|\|Linux
	\|-		\|-
	\|}		\|}

Jeepcoon: /* Relative products */

2017-03-16T08:06:06Z

Relative products

← Previous revision		Revision as of 08:06, 16 March 2017
Line 26:		Line 26:
	! scope="col"\| operating system		! scope="col"\| operating system
	\|-		\|-
	\| [http://www.myirtech.com/list.asp?id=525 MYC-C7Z010/20 CPU Module] \|\| MYIR \|\| ARM Cortex-A9 Xilinx XC7Z010/20\|\| 667MHz \|\|1GB DDR3 SDRAM \|\|4GB eMMC, 32MB QSPI Flash \|\| 75 x 55mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|Gigabit Ethernet,USB OTG,Serial ports,I2C,CAN,SPI\|\|Linux		\| [http://www.myirtech.com/list.asp?id=525 MYC-C7Z010/20 CPU Module] \|\| MYIR \|\| ARM Cortex-A9 Xilinx XC7Z010/20 processors\|\| 667MHz \|\|1GB DDR3 SDRAM \|\|4GB eMMC, 32MB QSPI Flash \|\| 75 x 55mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|Gigabit Ethernet,USB OTG,Serial ports,I2C,CAN and SPI\|\|Linux
			\|-
			\| [http://www.myirtech.com/list.asp?id=535 MYC-C437X CPU Module] \|\| MYIR \|\| ARM Cortex-A9 TI AM437x processors\|\| Up to 1GHz \|\|512MB DDR3 SDRAM \|\|4GB eMMC Flash, 32KB EEPROM\|\|60 x 45mm\|\| 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)\|\|USB,Serial ports, I2C,CAN,SPI,ADC and SDIO\|\|Linux
			\|-
			\| [http://www.myirtech.com/list.asp?id=475 MYC-IMX28X CPU Module] \|\| MYIR \|\| Freescale I.MX28 Series ARM926EJ-S Processors\|\|454MHz\|\|128MB DDR2 SDRAM \|\|256MB Nand Flash, 128KB SPI Flash\|\|62 x 38mm\|\|-40~85 Celsius (industrial grade)\|\|Ethernet,USB,Serial ports,I2C,SPI,ADC,PWM and SDIO\|\|Linux
			\|-
			\| [http://www.myirtech.com/list.asp?id=539 MYC-JA5D4X CPU Module] \|\| MYIR \|\|Atmel SAMA5D42/44 ARM Cortex-A5 Processorss\|\|600MHz\|\|512MB DDR2 SDRAM \|\|512MB Nand Flash, 4MB Data Flash, 64KB EEPROM\|\|67.60 x 45.00mm\|\|-40~85 Celsius (industrial grade)\|\|Ethernet,TWI,SPI,SMD,SDIO,etc\|\|Linux
	\|-		\|-
	\|}		\|}

Jeepcoon at 08:40, 15 March 2017

2017-03-15T08:40:43Z

@@ Line 12: / Line 12: @@
 A mechanical specialty of ESM modules is that their connectors are compatible with the [[PCI-104]] module standard. These modules can be "stacked" onto ESM modules, e. g., for additional peripheral interfaces.
-== See also ==
+==Relative products==
 * [[Computer-on-module]]
-== References ==
+== References==
 *Schmitz, M. (2005). [https://www.menmicro.com/downloads/search/dl/sk/%22ESM%20Specification%22/dx/1/ ESM Embedded System Modules Specification], MEN Mikro Elektronik GmbH. Retrieved on 2015-09-21.

← Previous revision		Revision as of 00:14, 3 December 2024
Line 14:		Line 14:
	== See also ==		== See also ==
	* [[Computer-on-module]]		* [[Computer-on-module]]
			* [[ESMexpress]]
	* [[Embedded system]]		* [[Embedded system]]

← Previous revision		Revision as of 17:48, 1 October 2023
Line 13:		Line 13:
	== See also ==		== See also ==
	* [[Computer-on-module]]		* [[Computer-on-module]]
			* [[Embedded system]]

	== References ==		== References ==