Exploding wire method - Revision history

OAbot: Open access bot: url-access updated in citation with #oabot.

2025-05-24T13:43:15Z

Open access bot: url-access updated in citation with #oabot.

← Previous revision		Revision as of 13:43, 24 May 2025
Line 37:		Line 37:

	=== Light Source ===		=== Light Source ===
	EWM is an effective mechanism by which to get a short duration high intensity light source. The peak intensity for copper wire, for example, is 9.6·10<sup>8</sup> candle power/cm<sup>2</sup>.<ref>{{cite journal\|last1=Conn\|first1=William\|title=The Use of "Exploding Wires" as a Light Source of Very High Intensity and Short Duration\|journal=Journal of the Optical Society of America\|date=October 28, 1949\|volume=41\|issue=7\|pages=445–9\|url=http://www.opticsinfobase.org/view_article.cfm?gotourl=http%3A%2F%2Fwww%2Eopticsinfobase%2Eorg%2FDirectPDFAccess%2FC2AAEF95-F7D9-36C6-8FD97DC46DA8F1A9_50214%2Fjosa-41-7-445%2Epdf%3Fda%3D1%26id%3D50214%26seq%3D0%26mobile%3Dno&org=University%20of%20California%20Santa%20Barbara%20%28CDL%29\|access-date=30 October 2014\|doi=10.1364/josa.41.000445\|pmid=14851124}}</ref> J.A. Anderson wrote in his initial spectrography studies that the light was comparable to a black body at 20,000 K.<ref name=anderson>{{cite journal\|last1=Anderson\|first1=J.A.\|title=The Spectral Energy Distribution And Opacity Of Wire Explosion Vapors\|journal= Proceedings of the National Academy of Sciences\|date=May 22, 1922\|volume=8\|issue=7\|pages=231–232\|doi=10.1073/pnas.8.7.231\|pmid=16586882\|pmc=1085099\|bibcode=1922PNAS....8..231A\|doi-access=free}}</ref> The advantage of a flash produced in this way is that it is easily reproducible with little variation in intensity. The linear nature of the wire allows for specifically shaped and angled light flashes and different types of wires can be used to produce different colors of light.<ref>{{cite journal\|last1=Oster\|first1=Gisela K.\|last2=Marcus\|first2=R. A.\|title=Exploding Wire as a Light Source in Flash Photolysis\|journal=The Journal of Chemical Physics\|date=1957\|volume=27\|issue=1\|pages=189\|doi=10.1063/1.1743665\|bibcode = 1957JChPh..27..189O \|url=https://authors.library.caltech.edu/11419/1/OSTjcp57a.pdf}}</ref> The light source can be used in [[interferometry]], [[flash photolysis]], quantitative [[spectroscopy]], and [[high-speed photography]].		EWM is an effective mechanism by which to get a short duration high intensity light source. The peak intensity for copper wire, for example, is 9.6·10<sup>8</sup> candle power/cm<sup>2</sup>.<ref>{{cite journal\|last1=Conn\|first1=William\|title=The Use of "Exploding Wires" as a Light Source of Very High Intensity and Short Duration\|journal=Journal of the Optical Society of America\|date=October 28, 1949\|volume=41\|issue=7\|pages=445–9\|url=http://www.opticsinfobase.org/view_article.cfm?gotourl=http%3A%2F%2Fwww%2Eopticsinfobase%2Eorg%2FDirectPDFAccess%2FC2AAEF95-F7D9-36C6-8FD97DC46DA8F1A9_50214%2Fjosa-41-7-445%2Epdf%3Fda%3D1%26id%3D50214%26seq%3D0%26mobile%3Dno&org=University%20of%20California%20Santa%20Barbara%20%28CDL%29\|access-date=30 October 2014\|doi=10.1364/josa.41.000445\|pmid=14851124\|url-access=subscription}}</ref> J.A. Anderson wrote in his initial spectrography studies that the light was comparable to a black body at 20,000 K.<ref name=anderson>{{cite journal\|last1=Anderson\|first1=J.A.\|title=The Spectral Energy Distribution And Opacity Of Wire Explosion Vapors\|journal= Proceedings of the National Academy of Sciences\|date=May 22, 1922\|volume=8\|issue=7\|pages=231–232\|doi=10.1073/pnas.8.7.231\|pmid=16586882\|pmc=1085099\|bibcode=1922PNAS....8..231A\|doi-access=free}}</ref> The advantage of a flash produced in this way is that it is easily reproducible with little variation in intensity. The linear nature of the wire allows for specifically shaped and angled light flashes and different types of wires can be used to produce different colors of light.<ref>{{cite journal\|last1=Oster\|first1=Gisela K.\|last2=Marcus\|first2=R. A.\|title=Exploding Wire as a Light Source in Flash Photolysis\|journal=The Journal of Chemical Physics\|date=1957\|volume=27\|issue=1\|pages=189\|doi=10.1063/1.1743665\|bibcode = 1957JChPh..27..189O \|url=https://authors.library.caltech.edu/11419/1/OSTjcp57a.pdf}}</ref> The light source can be used in [[interferometry]], [[flash photolysis]], quantitative [[spectroscopy]], and [[high-speed photography]].

	=== Production of Nanoparticles ===		=== Production of Nanoparticles ===

CE3 Caspernicus: /* Detonator */ Fixed typo

2025-04-26T14:42:26Z

Detonator: Fixed typo

← Previous revision		Revision as of 14:42, 26 April 2025
Line 26:		Line 26:

	=== Detonator ===		=== Detonator ===
	EWM has found its most common use as a detonator, named the [[exploding-bridgewire detonator]], for nuclear bombs. Bridgewire detonators are advantageous over chemical ~~fuzes~~ as the explosion is consistent and occurs only a few microseconds after the current is applied, with variation of only a few tens of nanoseconds from detonator to detonator.<ref name="Cooper">{{cite book		EWM has found its most common use as a detonator, named the [[exploding-bridgewire detonator]], for nuclear bombs. Bridgewire detonators are advantageous over chemical fuses as the explosion is consistent and occurs only a few microseconds after the current is applied, with variation of only a few tens of nanoseconds from detonator to detonator.<ref name="Cooper">{{cite book
	\|last=Cooper		\|last=Cooper
	\|first=Paul W.		\|first=Paul W.

Zinnober9: Reverted 1 edit by Pikachu25377777 (talk): Connection not apparent. Removed

2025-01-03T21:32:50Z

Reverted 1 edit by Pikachu25377777 (talk): Connection not apparent. Removed

← Previous revision		Revision as of 21:32, 3 January 2025
Line 1:		Line 1:
	The '''exploding wire method''' or '''EWM''' ~~{{flag\|Soviet_union}}~~ is a way to generate [[Plasma (physics)\|plasma]] that consists of sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].		The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists of sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].

	Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.		Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.

Pikachu25377777 at 16:25, 3 January 2025

2025-01-03T16:25:33Z

← Previous revision		Revision as of 16:25, 3 January 2025
Line 1:		Line 1:
	The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists of sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].		The '''exploding wire method''' or '''EWM''' {{flag\|Soviet_union}} is a way to generate [[Plasma (physics)\|plasma]] that consists of sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].

	Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.		Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.

John of Reading: /* Production of Nanoparticles */ Typo fixing, replaced: that that → that

2024-12-08T18:02:16Z

Production of Nanoparticles: Typo fixing, replaced: that that → that

← Previous revision		Revision as of 18:02, 8 December 2024
Line 44:		Line 44:
	When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.		When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.

	Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method ~~that~~ that were manufactured in Russia.<ref>{{cite web \|last=Ginley \|first=D. S. \|date=October 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf \|access-date=July 10, 2023 \|website=NREL}}</ref>		Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method that were manufactured in Russia.<ref>{{cite web \|last=Ginley \|first=D. S. \|date=October 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf \|access-date=July 10, 2023 \|website=NREL}}</ref>

	== References ==		== References ==

Citation bot: Altered bibcode. | Use this bot. Report bugs. | Suggested by Abductive | Category:Nanoparticles | #UCB_Category 33/37

2024-10-22T09:46:47Z

Altered bibcode. | Use this bot. Report bugs. | Suggested by Abductive | Category:Nanoparticles | #UCB_Category 33/37

← Previous revision		Revision as of 09:46, 22 October 2024
Line 4:		Line 4:

	== History ==		== History ==
	One of the first documented cases of using electricity to melt a metal occurred in the late 1700s <ref>{{cite book\|last1=Dibner\|first1=[by] Herbert W. Meyer. Foreword by Bern\|title=A history of electricity and magnetism\|date=1972\|publisher=Burndy Library\|location=Norwalk, Conn.\|isbn=026213070X\|page=32\|url=https://archive.org/details/AHistoryof_00_Meye\|url-access=registration}}</ref> and is credited to [[Martin van Marum]] who melted 70 feet of metal wire with 64 [[Leyden Jars]] as a capacitor. Van Marum's generator was built in 1784, and is now located in the [[Teylers Museum]] in the Netherlands. Years later, [[Benjamin Franklin]] vaporized thin gold leaf to burn images onto paper.<ref name=Precon>{{cite journal\|last1=Holcombe\|first1=J.A.\|last2=Sacks\|first2=R.D.\|title=Exploding wire excitation for trace analysis of Hg, Cd, Pb and Ni using electrodeposition for preconcentration\|journal=Spectrochimica Acta\|date=March 16, 1973\|volume=22B\|issue=12\|pages=451–467\|doi=10.1016/0584-8547(73)80051-5\|bibcode=~~1973AcSpe~~..28..451H\|hdl=2027.42/33764\|url=http://deepblue.lib.umich.edu/bitstream/handle/2027.42/33764/0000016.pdf?sequence=1\|access-date=2 November 2014\|hdl-access=free}}</ref><ref name="wireresearch">{{cite journal\|last1=McGrath\|first1=J.R.\|title=Exploding Wire Research 1774–1963\|journal=NRL Memorandum Report\|date=May 1966\|pages=17\|url=http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0633623\|archive-url=https://web.archive.org/web/20141129061758/http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0633623\|url-status=dead\|archive-date=November 29, 2014\|access-date=24 October 2014}}</ref> While neither Marum nor Franklin actually incited the exploding wire phenomenon, they were both important steps towards its discovery.		One of the first documented cases of using electricity to melt a metal occurred in the late 1700s <ref>{{cite book\|last1=Dibner\|first1=[by] Herbert W. Meyer. Foreword by Bern\|title=A history of electricity and magnetism\|date=1972\|publisher=Burndy Library\|location=Norwalk, Conn.\|isbn=026213070X\|page=32\|url=https://archive.org/details/AHistoryof_00_Meye\|url-access=registration}}</ref> and is credited to [[Martin van Marum]] who melted 70 feet of metal wire with 64 [[Leyden Jars]] as a capacitor. Van Marum's generator was built in 1784, and is now located in the [[Teylers Museum]] in the Netherlands. Years later, [[Benjamin Franklin]] vaporized thin gold leaf to burn images onto paper.<ref name=Precon>{{cite journal\|last1=Holcombe\|first1=J.A.\|last2=Sacks\|first2=R.D.\|title=Exploding wire excitation for trace analysis of Hg, Cd, Pb and Ni using electrodeposition for preconcentration\|journal=Spectrochimica Acta\|date=March 16, 1973\|volume=22B\|issue=12\|pages=451–467\|doi=10.1016/0584-8547(73)80051-5\|bibcode=1973AcSpB..28..451H\|hdl=2027.42/33764\|url=http://deepblue.lib.umich.edu/bitstream/handle/2027.42/33764/0000016.pdf?sequence=1\|access-date=2 November 2014\|hdl-access=free}}</ref><ref name="wireresearch">{{cite journal\|last1=McGrath\|first1=J.R.\|title=Exploding Wire Research 1774–1963\|journal=NRL Memorandum Report\|date=May 1966\|pages=17\|url=http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0633623\|archive-url=https://web.archive.org/web/20141129061758/http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD0633623\|url-status=dead\|archive-date=November 29, 2014\|access-date=24 October 2014}}</ref> While neither Marum nor Franklin actually incited the exploding wire phenomenon, they were both important steps towards its discovery.

	[[Edward Nairne]] was the first to note the existence of the exploding wire method in 1774 with silver and copper wire. Subsequently, [[Michael Faraday]] used EWM to deposit thin gold films through the solidification of vaporized metal on adjacent surfaces. Then, vapor deposits of metal gas as a result of EWM were studied by [[August Toepler]] during the 1800s. [[Spectrography]] investigation of the process, led by J.A. Anderson, became widespread in the 1900s. The spectrography experiments enabled a better understanding and subsequently the first glimpses of practical application. The mid 20th century saw experiments with EWM as a light source and for the production of nanoparticles in aluminum, uranium and plutonium wires. Congruently, [[Luis Walter Alvarez\|Luis Álvarez]] and [[Lawrence H. Johnston]] of the [[Manhattan Project]] found use for EWM in the development of nuclear detonators.<ref name="wireresearch"/><ref>{{cite book\|last1=Hansen\|first1=Stephen\|title=Exploding Wires Principles, Apparatus and Experiments\|date=2011\|publisher=Bell Jar\|url=http://www.belljar.net/Exploding_Wires.pdf\|access-date=24 October 2014}}</ref>		[[Edward Nairne]] was the first to note the existence of the exploding wire method in 1774 with silver and copper wire. Subsequently, [[Michael Faraday]] used EWM to deposit thin gold films through the solidification of vaporized metal on adjacent surfaces. Then, vapor deposits of metal gas as a result of EWM were studied by [[August Toepler]] during the 1800s. [[Spectrography]] investigation of the process, led by J.A. Anderson, became widespread in the 1900s. The spectrography experiments enabled a better understanding and subsequently the first glimpses of practical application. The mid 20th century saw experiments with EWM as a light source and for the production of nanoparticles in aluminum, uranium and plutonium wires. Congruently, [[Luis Walter Alvarez\|Luis Álvarez]] and [[Lawrence H. Johnston]] of the [[Manhattan Project]] found use for EWM in the development of nuclear detonators.<ref name="wireresearch"/><ref>{{cite book\|last1=Hansen\|first1=Stephen\|title=Exploding Wires Principles, Apparatus and Experiments\|date=2011\|publisher=Bell Jar\|url=http://www.belljar.net/Exploding_Wires.pdf\|access-date=24 October 2014}}</ref>

Slowpoke1: Typo

2024-07-27T13:01:50Z

Typo

← Previous revision		Revision as of 13:01, 27 July 2024
Line 1:		Line 1:
	The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists in sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].		The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists of sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].

	Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.		Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.

Mazewaxie: WP:GENFIXES

2024-04-13T13:50:59Z

WP:GENFIXES

← Previous revision		Revision as of 13:50, 13 April 2024
Line 1:		Line 1:
	The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists in sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].		The '''exploding wire method''' or '''EWM''' is a way to generate [[Plasma (physics)\|plasma]] that consists in sending a strong enough pulse of [[electric current]] through a thin [[wire]] of some [[electric conductivity\|electrically conductive]] material. The [[Joule heating\|resistive heating]] vaporizes the wire, and an [[electric arc]] through that vapor creates an [[explosion\|explosive]] [[shockwave]].

	Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.		Exploding wires are used as [[detonator]]s for [[explosives]], as momentary high intensity light sources, and in the production of metal [[nanoparticle]]s.
Line 37:		Line 37:

	=== Light Source ===		=== Light Source ===
	EWM is an effective mechanism by which to get a short duration high intensity light source. The peak intensity for copper wire, for example, is 9.6~~·~~10<sup>8</sup> candle power/cm<sup>2</sup>.<ref>{{cite journal\|last1=Conn\|first1=William\|title=The Use of "Exploding Wires" as a Light Source of Very High Intensity and Short Duration\|journal=Journal of the Optical Society of America\|date=October 28, 1949\|volume=41\|issue=7\|pages=445–9\|url=http://www.opticsinfobase.org/view_article.cfm?gotourl=http%3A%2F%2Fwww%2Eopticsinfobase%2Eorg%2FDirectPDFAccess%2FC2AAEF95-F7D9-36C6-8FD97DC46DA8F1A9_50214%2Fjosa-41-7-445%2Epdf%3Fda%3D1%26id%3D50214%26seq%3D0%26mobile%3Dno&org=University%20of%20California%20Santa%20Barbara%20%28CDL%29\|access-date=30 October 2014\|doi=10.1364/josa.41.000445\|pmid=14851124}}</ref> J.A. Anderson wrote in his initial spectrography studies that the light was comparable to a black body at 20,000 K.<ref name=anderson>{{cite journal\|last1=Anderson\|first1=J.A.\|title=The Spectral Energy Distribution And Opacity Of Wire Explosion Vapors\|journal= Proceedings of the National Academy of Sciences\|date=May 22, 1922\|volume=8\|issue=7\|pages=231–232\|doi=10.1073/pnas.8.7.231\|pmid=16586882\|pmc=1085099\|bibcode=1922PNAS....8..231A\|doi-access=free}}</ref> The advantage of a flash produced in this way is that it is easily reproducible with little variation in intensity. The linear nature of the wire allows for specifically shaped and angled light flashes and different types of wires can be used to produce different colors of light.<ref>{{cite journal\|last1=Oster\|first1=Gisela K.\|last2=Marcus\|first2=R. A.\|title=Exploding Wire as a Light Source in Flash Photolysis\|journal=The Journal of Chemical Physics\|date=1957\|volume=27\|issue=1\|pages=189\|doi=10.1063/1.1743665\|bibcode = 1957JChPh..27..189O \|url=https://authors.library.caltech.edu/11419/1/OSTjcp57a.pdf}}</ref> The light source can be used in [[interferometry]], [[flash photolysis]], quantitative [[spectroscopy]], and [[high-speed photography]].		EWM is an effective mechanism by which to get a short duration high intensity light source. The peak intensity for copper wire, for example, is 9.6·10<sup>8</sup> candle power/cm<sup>2</sup>.<ref>{{cite journal\|last1=Conn\|first1=William\|title=The Use of "Exploding Wires" as a Light Source of Very High Intensity and Short Duration\|journal=Journal of the Optical Society of America\|date=October 28, 1949\|volume=41\|issue=7\|pages=445–9\|url=http://www.opticsinfobase.org/view_article.cfm?gotourl=http%3A%2F%2Fwww%2Eopticsinfobase%2Eorg%2FDirectPDFAccess%2FC2AAEF95-F7D9-36C6-8FD97DC46DA8F1A9_50214%2Fjosa-41-7-445%2Epdf%3Fda%3D1%26id%3D50214%26seq%3D0%26mobile%3Dno&org=University%20of%20California%20Santa%20Barbara%20%28CDL%29\|access-date=30 October 2014\|doi=10.1364/josa.41.000445\|pmid=14851124}}</ref> J.A. Anderson wrote in his initial spectrography studies that the light was comparable to a black body at 20,000 K.<ref name=anderson>{{cite journal\|last1=Anderson\|first1=J.A.\|title=The Spectral Energy Distribution And Opacity Of Wire Explosion Vapors\|journal= Proceedings of the National Academy of Sciences\|date=May 22, 1922\|volume=8\|issue=7\|pages=231–232\|doi=10.1073/pnas.8.7.231\|pmid=16586882\|pmc=1085099\|bibcode=1922PNAS....8..231A\|doi-access=free}}</ref> The advantage of a flash produced in this way is that it is easily reproducible with little variation in intensity. The linear nature of the wire allows for specifically shaped and angled light flashes and different types of wires can be used to produce different colors of light.<ref>{{cite journal\|last1=Oster\|first1=Gisela K.\|last2=Marcus\|first2=R. A.\|title=Exploding Wire as a Light Source in Flash Photolysis\|journal=The Journal of Chemical Physics\|date=1957\|volume=27\|issue=1\|pages=189\|doi=10.1063/1.1743665\|bibcode = 1957JChPh..27..189O \|url=https://authors.library.caltech.edu/11419/1/OSTjcp57a.pdf}}</ref> The light source can be used in [[interferometry]], [[flash photolysis]], quantitative [[spectroscopy]], and [[high-speed photography]].

	=== Production of Nanoparticles ===		=== Production of Nanoparticles ===
	Nanoparticles are created by EWM when the ambient gas of the system cools the recently produced vaporous metal.<ref>{{cite journal\|last1=Mathur\|first1=Sanjay\|last2=Sing\|first2=Mrityunjay\|title=Nanostructured Materials and Nanotechology III\|journal=Ceramic Engineering and Science Proceedings\|date=2010\|volume=30\|issue=7\|page=92\|isbn=9780470584361\|url=https://books.google.com/books?id=9-OEIi0QIUEC&pg=PA90}}</ref> EWM can be used to cheaply and efficiently produce nanoparticles at a rate of 50 – 300 grams per hour and at a purity of above 99~~ ~~%.<ref name=naz/><ref name="prepnano"/> The process requires a relatively low energy consumption as little energy is lost in an electric to thermal energy conversion. Environmental effects are minimal due to the process taking place in a closed system. The Particles can be as small as 10 nm but are most commonly below 100 nm in diameter. Physical attributes of the nanopowder can be altered depending on the parameters of the explosion. For example, as the voltage of the capacitor is raised, the particle diameter decreases. Also, the pressure of the gas environment can change the dispersiveness of the nanoparticles.<ref name="naz"/> Through such manipulations the functionality of the nanopowder may be altered.		Nanoparticles are created by EWM when the ambient gas of the system cools the recently produced vaporous metal.<ref>{{cite journal\|last1=Mathur\|first1=Sanjay\|last2=Sing\|first2=Mrityunjay\|title=Nanostructured Materials and Nanotechology III\|journal=Ceramic Engineering and Science Proceedings\|date=2010\|volume=30\|issue=7\|page=92\|isbn=9780470584361\|url=https://books.google.com/books?id=9-OEIi0QIUEC&pg=PA90}}</ref> EWM can be used to cheaply and efficiently produce nanoparticles at a rate of 50 – 300 grams per hour and at a purity of above 99%.<ref name=naz/><ref name="prepnano"/> The process requires a relatively low energy consumption as little energy is lost in an electric to thermal energy conversion. Environmental effects are minimal due to the process taking place in a closed system. The Particles can be as small as 10 nm but are most commonly below 100 nm in diameter. Physical attributes of the nanopowder can be altered depending on the parameters of the explosion. For example, as the voltage of the capacitor is raised, the particle diameter decreases. Also, the pressure of the gas environment can change the dispersiveness of the nanoparticles.<ref name="naz"/> Through such manipulations the functionality of the nanopowder may be altered.

	When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.		When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.

Citation bot: Removed parameters. | Use this bot. Report bugs. | #UCB_CommandLine

2023-09-27T06:11:46Z

Removed parameters. | Use this bot. Report bugs. | #UCB_CommandLine

← Previous revision		Revision as of 06:11, 27 September 2023
Line 44:		Line 44:
	When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.		When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.

	Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method that that were manufactured in Russia.<ref>{{cite web \|last=Ginley \|first=D. S. \|date=October 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf ~~\|url-status=live~~ \|access-date=July 10, 2023 \|website=NREL}}</ref>		Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method that that were manufactured in Russia.<ref>{{cite web \|last=Ginley \|first=D. S. \|date=October 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf \|access-date=July 10, 2023 \|website=NREL}}</ref>

	== References ==		== References ==

Keith D: /* Production of Nanoparticles */ Fix cite date errors

2023-07-10T21:32:47Z

Production of Nanoparticles: Fix cite date errors

← Previous revision		Revision as of 21:32, 10 July 2023
Line 44:		Line 44:
	When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.		When EWM is performed in a standard atmosphere containing oxygen, metal oxides are formed. Pure metal nanoparticles can also be produced with EWM in an inert environment, usually argon gas or distilled water.<ref name=flur>{{cite arXiv\|eprint=cond-mat/0609369\|last1=Alqudami\|first1=Abdullah\|last2=Annapoorni\|first2=S.\|title=Fluorescence from metallic silver and iron nanoparticles prepared by exploding wire technique\|year=2006}}</ref> Pure metal nanopowders must be kept in their inert environment because they ignite when exposed to oxygen in air.<ref name="prepnano"/> Often, the metal vapor is contained by operating the mechanism within a steel box or similar container.

	Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method that that were manufactured in Russia.<ref>{{~~Cite~~ web \|last=Ginley \|first=D.S. \|date=October, 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf \|url-status=live \|access-date=7/10/2023 \|website=NREL}}</ref>		Nanoparticles are a relatively new material used in medicine, manufacturing, environmental cleanup and circuitry. Metal oxide and pure metal nanoparticles are used in [[Catalysis]], sensors, oxygen antioxident, self repairing metal, ceramics, [[UV rays\|UV ray]] protection, odor proofing, improved batteries, printable circuits, [[Optoelectronics\|optoelectronic materials]], and [[Environmental remediation]].<ref name=Nanouses>{{cite web\|last1=Boysen\|first1=Earl\|title=Nanoparticles Applications and Uses\|url=http://www.understandingnano.com/nanoparticles.html\|website=understandingnano\|access-date=2 November 2014}}</ref><ref>{{cite journal\|last1=Oskam\|first1=Gerko\|title=Metal oxide nanoparticles: synthesis, characterization and application\|journal=Journal of Sol-Gel Science and Technology\|date=24 February 2006\|volume=37\|issue=3\|pages=161–164\|doi=10.1007/s10971-005-6621-2\|s2cid=98446250}}</ref> The demand for metal nanoparticles, and therefore production methods, has increased as interest in nanotechnology continues to rise. Despite its overwhelming simplicity and efficiency, it is difficult to modify the experimental apparatus to be used on an industrial scale. As such, EWM has not seen widespread utilization in material production industry due to issues in manufacturing quantity. Still, for some time, [[Argonide]] offered metal nanopowders made by the exploding wire method that that were manufactured in Russia.<ref>{{cite web \|last=Ginley \|first=D. S. \|date=October 1999 \|title=Nanoparticle Derived Contacts for Photovoltaic Cells \|url=https://www.nrel.gov/docs/fy99osti/26685.pdf \|url-status=live \|access-date=July 10, 2023 \|website=NREL}}</ref>

	== References ==		== References ==