Finite element model data post-processing - Revision history

Ost316: Filled in 1 bare reference(s) with reFill 2 | Cleaned up using AutoEd

2024-07-12T23:19:20Z

Filled in 1 bare reference(s) with reFill 2 | Cleaned up using AutoEd

← Previous revision		Revision as of 23:19, 12 July 2024
Line 1:		Line 1:
	'''Finite element model data post-processing''' is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.		'''Finite element model data post-processing''' is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://web.archive.org/web/20190225153024/http://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply (e.g., the check of panel stiffened structures<ref>[https://femds.com/Panel_check_software~~.aspx~~ ~~check~~ of ~~panel~~ ~~stiffened~~ ~~structures]~~</ref>). Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://web.archive.org/web/20190225153024/http://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply (e.g., the check of panel stiffened structures<ref>{{Cite web\|url=https://femds.com/FEMDS_software_background/Panel_check_software\|title=Stiffener and plate buckling \| FEM Data Streamliner\|website=femds.com}}</ref>). Using this software can be considered part of the [[knowledge-based engineering]] principle.

	==References==		==References==
	{{reflist}}{{Software-stub}}{{Engineering-stub}}		{{reflist}}

			{{Software-stub}}
			{{Engineering-stub}}

	[[Category:Finite element software]]		[[Category:Finite element software]]

Ost316: +stub templates

2024-07-12T23:18:35Z

+stub templates

← Previous revision		Revision as of 23:18, 12 July 2024
Line 1:		Line 1:
	Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.		'''Finite element model data post-processing''' is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://web.archive.org/web/20190225153024/http://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://web.archive.org/web/20190225153024/http://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply (e.g., the check of panel stiffened structures<ref>[https://femds.com/Panel_check_software.aspx check of panel stiffened structures]</ref>). Using this software can be considered part of the [[knowledge-based engineering]] principle.

	==References==		==References==
	{{reflist}}		{{reflist}}{{Software-stub}}{{Engineering-stub}}

	[[Category:Finite element software]]		[[Category:Finite element software]]

GreenC bot: Rescued 1 archive link. Wayback Medic 2.5

2021-04-30T15:01:59Z

Rescued 1 archive link. Wayback Medic 2.5

← Previous revision		Revision as of 15:01, 30 April 2021
Line 1:		Line 1:

	Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.		Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://web.archive.org/web/20190225153024/http://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.

	==References==		==References==

WikiCleanerBot: v2.03b - Bot T20 CW#61 - WP:WCW project (Reference before punctuation)

2020-11-05T11:10:48Z

v2.03b - Bot T20 CW#61 - WP:WCW project (Reference before punctuation)

← Previous revision		Revision as of 11:10, 5 November 2020
Line 2:		Line 2:
	Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.		Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented.<ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.

	==References==		==References==

37.48.48.171 at 16:48, 2 November 2020

2020-11-02T16:48:09Z

← Previous revision		Revision as of 16:48, 2 November 2020
Line 1:		Line 1:

	Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose or reporting results.		Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose of reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.

Dubway: slight word change

2019-09-20T14:35:31Z

slight word change

← Previous revision		Revision as of 14:35, 20 September 2019
Line 1:		Line 1:

	Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method~~\|Finite element models~~]] (FEM) into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose or reporting results.		Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method]] (FEM) calculations into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose or reporting results.

	Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.

Dubway: Major over-hall to the wording of this article.

2019-09-20T14:34:10Z

Major over-hall to the wording of this article.

← Previous revision		Revision as of 14:34, 20 September 2019
Line 1:		Line 1:

			Finite element model data post-processing is a paradigm for transforming the often highly detailed and complex outputs of [[Finite Element Method\|Finite element models]] (FEM) into a format that is easily understood by the user. The outputs from post-processing may be used in engineering judgements or analysis, as part of validity/functionality checks on the FEM model, or for the purpose or reporting results.
	[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.

	Post processing of finite element data generally ~~requests~~ additional software to ~~organize~~ ~~the~~ ~~output~~ ~~such~~ ~~that~~ it is ~~easily~~ ~~understandable~~ ~~whether~~ ~~the~~ ~~construction~~ ~~is acceptable or not.~~<ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It ~~can~~ include checks on the codes and standards to which the ~~construction~~ must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. ~~Writing~~ this software is part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requires additional software or programming to specify how the data is to be transformed or presented <ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref>. This software may include checks on the codes and standards to which the model must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Using this software can be considered part of the [[knowledge-based engineering]] principle.

	==References==		==References==

Jarble: adding links to references using Google Scholar

2019-06-07T17:06:24Z

adding links to references using Google Scholar

← Previous revision		Revision as of 17:06, 7 June 2019
Line 2:		Line 2:
	[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.		[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.

	Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis, Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Writing this software is part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,[https://pdfs.semanticscholar.org/7046/d3e729da7a638908c7c9d212c71a3890aa8a.pdf Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis], Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Writing this software is part of the [[knowledge-based engineering]] principle.

	==References==		==References==

213.10.19.103: Updated link

2016-05-12T15:17:15Z

Updated link

← Previous revision		Revision as of 15:17, 12 May 2016
Line 2:		Line 2:
	[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.		[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.

	Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis, Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [https://femds.com/~~Verification_buckling_code_check~~.aspx check on ~~buckling]~~ of ~~the structure~~. Writing this software is part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis, Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [https://femds.com/Panel_check_software.aspx check of panel stiffened structures]. Writing this software is part of the [[knowledge-based engineering]] principle.

	==References==		==References==

E.peetam at 14:44, 11 September 2015

2015-09-11T14:44:08Z

← Previous revision		Revision as of 14:44, 11 September 2015
Line 2:		Line 2:
	[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.		[[Finite Element Method\|Finite element models]] (FEM) are nowadays used to calculate complex structures and mechanical systems. Since the grown calculation capacity of computers makes it possible to make more and more detailed [[Finite Element Method\|finite element models]], the file output of these programs can be enormous. It can be so large that you need to ''post process'' this data. Postprocessing may be defined as the “art of results representation”.

	Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis, Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [[femds.com/Verification_buckling_code_check.aspx\|check on buckling]] of the structure. Writing this software is part of the [[knowledge-based engineering]] principle.		Post processing of finite element data generally requests additional software to organize the output such that it is easily understandable whether the construction is acceptable or not.<ref>J.Y.Lee and S-Y.Ahn,Interactive visualization of elasto-plastic behavior through stress paths and yield surfaces in finite element analysis, Finite Element in Analysis and Design, 47(2011), pp496-510</ref> It can include checks on the codes and standards to which the construction must comply e.g. the [https://femds.com/Verification_buckling_code_check.aspx check on buckling] of the structure. Writing this software is part of the [[knowledge-based engineering]] principle.

	==References==		==References==