Module:Location map/data/USA Washington: Difference between revisions

Module documentation[view] [edit] [history] [purge]

Location map of Washington (state)

name	Washington (state)
border coordinates
	49.2
	-125	←↕→	-116.7
	45.3
map center	47.25°N 120.85°W / 47.25; -120.85
image	USA Washington location map.svg
image1	USA Washington relief location map.jpg

Map of Washington (click on map to see larger image)

Module:Location map/data/USA Washington is a location map definition used to overlay markers and labels on an equirectangular projection map of Washington (state). The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "USA Washington":

• {{Location map|USA Washington |...}}
• {{Location map many|USA Washington |...}}
• {{Location map+|USA Washington |...}}
• {{Location map~|USA Washington |...}}

Map definition

• name = Washington (state)

  Name used in the default map caption

• image = USA Washington location map.svg

  The default map image, without "Image:" or "File:"

• image1 = USA Washington relief location map.jpg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• top = 49.2

  Latitude at top edge of map, in decimal degrees

• bottom = 45.3

  Latitude at bottom edge of map, in decimal degrees

• left = -125

  Longitude at left edge of map, in decimal degrees

• right = -116.7

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 8.3 degrees.

• At an image width of 200 pixels, that is 0.0415 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0083 degrees per pixel.

Latitude: from North to South this map definition covers 3.9 degrees.

• At an image height of 200 pixels, that is 0.0195 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0039 degrees per pixel.

Examples using location map templates

Location map

Olympia

Olympia (Washington (state))

{{Location map | USA Washington
| width   = 250
| lat_deg =  47 | lat_min = 02 | lat_sec = 33 | lat_dir = N
| lon_deg = 122 | lon_min = 53 | lon_sec = 35 | lon_dir = W
| label   = Olympia
}}

Location map many

Blaine

Camas

Ilwaco

Newport

class=notpageimage|

Locations in Washington

{{Location map many | USA Washington
| width    = 250
| caption  = Locations in Washington
| lat1 = 48.988 | long1 = -122.744 | label1 = Blaine
| lat2 = 45.591 | long2 = -122.412 | label2 = Camas
| lat3 = 46.313 | long3 = -124.030 | label3 = Ilwaco
| lat4 = 48.181 | long4 = -117.048 | label4 = Newport
}}

Location map+

Blaine

Camas

Ilwaco

Newport

class=notpageimage|

Locations in Washington

{{Location map+ | USA Washington
| width   = 250
| caption = Locations in Washington
| places  =
  {{Location map~ | USA Washington
  | lat = 48.988 | long = -122.744 | label = Blaine
  }}
  {{Location map~ | USA Washington
  | lat = 45.591 | long = -122.412 | label = Camas
  }}
  {{Location map~ | USA Washington
  | lat = 46.313 | long = -124.030 | label = Ilwaco
  }}
  {{Location map~ | USA Washington
  | lat = 48.181 | long = -117.048 | label = Newport
  }}
}}

See also

• Module:Location map/data/USA

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

The above documentation is transcluded from Module:Location map/data/USA Washington/doc. (edit | history)
Editors can experiment in this module's sandbox (create | mirror) and testcases (create) pages.
Subpages of this module.

return {
	name = 'Washington (state)',
	top = 49.2,
	bottom = 45.3,
	left = -125,
	right = -116.7,
	image = 'USA Washington location map.svg',
	image1 = 'USA Washington relief location map.jpg'
}