Module:Location map/data/Italy

Module documentation[view] [edit] [history] [purge]

Location map of Italy

name	Italy
border coordinates
	47.4
	6.2	←↕→	19
	35.3
map center	41.35°N 12.6°E / 41.35; 12.6
image	Italy provincial location map.svg
image1	Italy relief location map.jpg
image2	Italy location map.svg

Map of Italy

Module:Location map/data/Italy is a location map definition used to overlay markers and labels on an equirectangular projection map of Italy. The markers are placed by latitude and longitude coordinates on the default map or a similar map image.

Usage

These definitions are used by the following templates when invoked with parameter "Italy":

• {{Location map|Italy |...}}
• {{Location map many|Italy |...}}
• {{Location map+|Italy |...}}
• {{Location map~|Italy |...}}

Map definition

• name = Italy

  Name used in the default map caption

• image = Italy provincial location map.svg

  The default map image, without "Image:" or "File:"

• image1 = Italy relief location map.jpg

  An alternative map image, usually a relief map, which can be displayed via the relief or AlternativeMap parameters

• image2 = Italy location map.svg

  Alternative map image which can be displayed via the AlternativeMap parameter

• top = 47.4

  Latitude at top edge of map, in decimal degrees

• bottom = 35.3

  Latitude at bottom edge of map, in decimal degrees

• left = 6.2

  Longitude at left edge of map, in decimal degrees

• right = 19

  Longitude at right edge of map, in decimal degrees

Alternative map

The {{Location map}}, {{Location map many}}, and {{Location map+}} templates have parameters to specify an alternative map image. The map displayed as image1 can be used with the relief or AlternativeMap parameters. The map displayed as image2 can be used with the AlternativeMap parameter. Examples may be found below or in the following:

• Template:Location map#Relief parameter
• Template:Location map+/relief
• Template:Location map#AlternativeMap parameter
• Template:Location map+/AlternativeMap

Precision

Longitude: from West to East this map definition covers 12.8 degrees.

• At an image width of 200 pixels, that is 0.064 degrees per pixel.
• At an image width of 1000 pixels, that is 0.0128 degrees per pixel.

Latitude: from North to South this map definition covers 12.1 degrees.

• At an image height of 200 pixels, that is 0.0605 degrees per pixel.
• At an image height of 1000 pixels, that is 0.0121 degrees per pixel.

Examples using location map templates

Location map, using default map (image)

Rome

Rome (Italy)

{{Location map | Italy
| width   = 200
| lat_deg = 41.9
| lon_deg = 12.5
| label   = Rome
}}

Location map many, using relief map (image1)

Rome

Lecce

class=notpageimage|

Two locations in Italy

{{Location map many | Italy
| relief   = yes
| width    = 200
| caption  = Two locations in Italy
| lat1_deg = 41.9
| lon1_deg = 12.5
| label1   = Rome
| lat2_deg = 40.35
| lon2_deg = 18.17
| label2   = Lecce
}}

Location map+, using AlternativeMap

Rome

Lecce

class=notpageimage|

Two locations in Italy

{{Location map+ | Italy
| AlternativeMap = Italy location map.svg
| width   = 200
| caption = Two locations in Italy
| places  =
  {{Location map~ | Italy
  | lat_deg = 41.9
  | lon_deg = 12.5
  | label   = Rome
  }}
  {{Location map~ | Italy
  | lat_deg = 40.35
  | lon_deg = 18.17
  | label   = Lecce
  }}
}}

See also

Location map templates

• Template:Location map, to display one mark and label using latitude and longitude
• Template:Location map many, to display up to nine marks and labels
• Template:Location map+, to display an unlimited number of marks and labels

Creating new map definitions

• Template:Location map/Creating a new map definition

The above documentation is transcluded from Module:Location map/data/Italy/doc. (edit | history)
Editors can experiment in this module's sandbox (create | mirror) and testcases (create) pages.
Subpages of this module.

return {
	name = 'Italy',
	top = 47.4,
	bottom = 35.3,
	left = 6.2,
	right = 19.0,
	image = 'Italy provincial location map.svg',
	image1 = 'Italy relief location map.jpg',
	image2 = 'Italy location map.svg'
}