Module:Road data/strings/USA/OR
This module is used to store type data for use with several road templates, including {{jct}} and {{routelist row}}. Background information and a summary of the syntax are listed below.
Exported types
This module exports the following types:
ADHS, Back Country, BCB, BL, BL 1957, BLBS, BRP, BS, BS 1957, Byway, CA, CR, Dixie, FFH, FH, FH-named, FR, FSB, Future, GRR, GRR-Spur, I, I 1957, I 1961, I 1971, I-Alt, I-Express, I-Future, I-Local, I-named, I-Spur, I-Temp, I-Temporary, I-Toll, I-Truck, ID, ISTEA, Jefferson, LCT, Lincoln, Mormon, National, NER, NFSB, NHS, Npkwy, NSB, NTP, NV, OR, OR 1932, OR 1948, OR-Bus, OR-Spur, Parkway, Pkwy, Post, Postal, road, Scenic, Skyline, Tour, Trail, US, US 1926, US 1948, US 1961, US 1961-Alt, US 1971, US-Alt, US-Bus, US-Byp, US-City, US-Conn, US-Detour, US-Emerg, US-Future, US-Hist, US-named, US-Old, US-Opt, US-Scenic, US-Spur, US-Temp, US-Toll, US-Truck, USBR, USBR 2009 and WA
Syntax
Hierarchy and fields
At its most basic level, this module is a nested table of strings. At the top is the root table, named for the abbreviation of a country, state, or province. This table stores the type data for a particular place, which is named in the comment in the first line, and is returned at the end of the module. The table is composed of further tables, one per type. The basic syntax for a type table is:
place.type = {
shield = "",
name = "",
link = "",
abbr = ""
}
The four main fields in a type table are shield, name, link, and abbr. Currently, these are the types used by all countries. By convention, they are always specified, using an empty string "", if there is no value.
shielddetermines the shield that is displayed, if anynamespecifies the name of the route displayed by an infoboxlinkspecifies the target of a link generated, if anyabbrdetermines the displayed abbreviation.
Other common fields in road data tables
shieldmainis used when a different shield is desired at the top of an infobox, such as for county roads.
USA.CR = {
shield = "CR %route% jct.svg",
shieldmain = "[county||%county% |]County %route%.svg",
name = "County Road %route%",
link = "",
abbr = "CR %route%"
}
shieldlistis used when a different shield is desired in lists that utilize the {{Routelist row}} series of templates.
basecan be used for aliasing different types that have a similar base structure, such as U.S. Highway special routes.
bannerstores the name of the special route plate, such asBusiness plate.svg. Can be omitted when unused.widthstores a code representing the width of the shield. It is most often helpful when used withbanner. Can be omitted entirely when unused; common values aresquareandexpand.
sectionstores the specific section number for those routes that are defined by law.
translationspecifies the native language name of the route displayed by an infoboxlangis the ISO 639-2 code of the native language; this code is used by {{Lang}} and Lang-xx templates.
PER.RN = {
shield = "PE-%route% route sign.svg",
name = "National Route %route%",
link = "Peru Highway %route%",
abbr = "PE-%route%",
translation = "Ruta nacional %route%",
lang = "es-pe"
}
Once a type is defined, it can be referenced later in the code. As seen here, it is common to define all parameters for main types like US and then to use aliases for subtypes such as US-Alt.
MO.US = {
shield = "US %route%.svg",
base = "U.S. Route %route%",
link = "U.S. Route %route% in Missouri",
abbr = "US %route%",
width = "expand"
}
MO["US-Alt"] = {
shield = MO.US.shield,
link = MO.US.base .. " Alternate ([dab||%dab%, |]Missouri)",
abbr = MO.US.abbr .. " Alt.",
banner = "Alternate plate.svg",
width = "expand"
}
Parser arguments
When the parser function of Module:Road data/parser is called, it is passed up to three parameters. The second one is the field to parse, and the last one is a rarely-used option designed for multiple-shield types. The first and most important parameter is a table of arguments collected by the calling module, which generally includes the state, country, or both; the type and number of the route; and a few miscellaneous arguments. This table of arguments forms the basis of the parser's format string syntax.
The table accessible by the strings includes the following entries by default:
state: The state or province the route is located in.country: The country the route is located in. If the country is not passed by the calling module, the parser will attempt to include it.
The above entries are primarily used to find the string module itself, so they should not be a concern for module writers.
type: The type of the route. This determines the entry of the root table that is used by the parser.route: The route "number". This is easily the most important argument for module writers.
The following entries are used less often:
county: The county the route is located in. This is usually used for county routes in the United States.township: This entry is similar in function and utility to thecountyentry.dab: A tag used to disambiguate the link target. This is mostly used for bannered routes in the United States.denom: This rare entry is used exclusively for West Virginia county routes.
Parser hooks, which will be described later, can add entries to this table that may be used by strings.
Basic string syntax
The most basic value that can be used for most type table fields is a specially formatted string, which will be referred to in this documentation as a format string. This is the string that will ultimately be parsed and returned by the parser. A format string is an ordinary string object. The power of these strings comes in the form of two special instructions that are recognized by the parser.
The first is anything in %argument% form. The parser will replace such a statement with the value of the argument entry in the arguments table described earlier. This is what allows the route number to be spliced into a shield or link name.
The second special string is in the form of [arg|equals|then|else]. This functions as a rudimentary if-then-else statement. The parser tests the value of arg to see if it is equal to the value specified in equals. equals may be empty, in which case the parser tests the existence of the arg argument. If the result of the test is true, the statement is replaced with the value of the then block. Otherwise, it is replaced with the value of the else block.
The two statements may be combined. The parser will parse the if-then-else statement first, and then perform the argument inclusion. This combination is commonly used with bannered routes in the United States, where the dab argument is tested and the link disambiguation is adjusted accordingly, as follows:
AL["US-Bus"] = {
shield = "US %route%.svg",
link = "U.S. Route %route% Business ([dab||%dab%, |]Alabama)",
abbr = "US-%route% Bus.",
banner = "Business plate.svg",
width = "expand"
}
When parsing the link field, the parser first checks to see if the dab argument was provided. If so, it replaces the statement with %dab%, . If not, the statement is replaced with the empty string placed in the else block. Then, the parser replaces %route% with the route number and, if the dab argument was provided, %dab% with the value of that argument.
Switching
Some logic is too complicated to represent with only format strings. This framework provides several methods to express complex data. All of these involve storing a nested table as the value of a field.
The most straightforward functionality provided by nested tables is switching. In its most basic form, the table consists of a series of key-value pairs, with the keys being route numbers and the values being the format strings used by those routes. Usually, the format string returned does not need parsing, but the option is there. A default entry should be provided to handle any route numbers not explicitly stated. The following is a representative example of route-based switching (from Module:Road data/strings/USA/AR):
AR.AR = {
shield = {
default = "Arkansas %route%.svg",
["917"] = "Arkansas 917-1.svg",
["980"] = "Arkansas 980(Airport).svg"
},
link = "Arkansas Highway %route% [dab||(%dab%)|]",
abbr = "Hwy. %route%",
width = "expand"
}
In this example, Highways 917 and 980 have non-standard shield names, which are explicitly provided. Other route numbers use the default format.
Switching on other arguments is also allowed. The name of the argument to be used for switching is stated in the arg field of the table. Nesting switches on different arguments is also allowed. A good example that uses both forms of switching can be found in Ontario:
local regionalShields = {
arg = "county",
["Essex"] = "Essex County Road %route%.png",
["York"] = "York Regional Road %route%.svg",
["Durham"] = "Durham Regional Road %route%.svg",
["Niagara"] = "Niagara Regional Road %route%.svg",
["Simcoe"] = {
["52"] = "Simcoe county road 52.png",
default = "Simcoe County Road %route%.JPG"
}
}
In this example, which is a shield table that is reused by several types in Ontario, the county argument is used for the primary switch. If the route is in Simcoe County, a second switch is performed, this time on the route number.
Existence testing
Another use for tables is existence testing. If a table has the ifexists field set to true, the parser will perform existence testing on the result of parsing the default field. If the test fails, the result of parsing the otherwise field is returned. Existence testing may be chained by using a second ifexists table as the value of the first table's otherwise field, and so on. Here's an example of nested existence testing (from Module:Road data/strings/GBR):
GBR.B = {
shield = {
ifexists = true,
default = "UK road B%route%.svg",
otherwise = {
ifexists = true,
default = "UK road B%route%.png"
}
},
link = "",
abbr = "B%route%"
}
Hooks
Due to technical limitations, these string modules cannot contain functions. Rather than force functionality into the string framework, the parser can call functions in a separate hooks module. The functions in this module, Module:Road data/parser/hooks, are more-or-less fully functional functions. The exact functionalities of these hooks are beyond the scope of this documentation. Descriptions of these hooks may be found on their documentation page.
Generally speaking, a hook is called by setting the hook field in a table as equal to the name of a hook. Hooks receive two arguments, both tables: parameters, which is the table in the definition; and args, which is simply the table of arguments normally passed to the parser. The hook returns a string, which is then parsed as usual. A powerful feature of hooks is that they can add arbitrary values to the argument table, which may be referenced in the string returned by the hook. Generally, the format string returned by the hook is specified in some form by the default field of the table, though there are exceptions. Here is an example of a hook (from Module:Road data/strings/MEX):
MEX.SH = {
shield = {
ifexists = true,
arg = "state",
SON = "HIGHWAYSON %route%.jpg",
NLE = "Nuevo Leon State Highway %route%.PNG",
default = ""
},
link = {
hook = "mask",
mask = "Road data/masks/MEX",
base = "state",
masked = "fullstate",
default = "%fullstate% State Highway %route%"
},
abbr = "SH %route%"
}
In this example, the parser will process the link by calling the mask hook. In short, this hook takes the argument referenced in base, passes it through the mask module specified in mask, and stores it in the field in the arguments noted in masked. The hook returns the string given in default, which has access to the fullstate argument added by the hook.
Other functionality
Functionality exists to display multiple shields for one route, which is used to display tolled and free shields for routes where they differ. This is done by supplying a table with two values, which are listed without indices. The parser is called twice by the calling module, and it returns one shield per call. An example may be found in Texas:
TX.Both = {
shield = {"Texas %route%.svg", "Toll Texas %route% new.svg"},
link = "Texas State Highway %route%",
abbr = "SH %route%",
width = 40
}
Structure
Each country has its own module. In the United States and Canada, each state/territory/province also has its own module. Each module begins with a comment stating the name of the country or state, followed by the root table declaration, as follows (from Module:Road data/strings/USA/AS):
-- American Samoa
local AS = {}
The root table is named based on the established abbreviation for the country or state, which is the same as the abbreviation used in the module title. This table stores the various types used in that particular place. Most of the remaining code in the module defines these various types. The module ends by returning the root table:
return AS
Aliasing
There are two ways to define a type as an alias. If the type is defined within the module, simply set the new type as equal to the type being aliased, as shown above (from Module:Road data/strings/HKG):
HKG.Route = {
shield = "HK Route%route%.svg",
link = "Route %route% (Hong Kong)",
abbr = "Route %route%"
}
HKG.route = HKG.Route
If the type is defined in a separate module, such as a state highway type being used in another state's module, a special syntax may be used to refer to that module (from Module:Road data/strings/USA/NJ):
NJ.NY = {alias = {module = "USA/NY", type = "NY"}}
This code sets the NY type as a link to the NY type in Module:Road data/strings/USA/NY. The parser will import that module and process the type as if the original module had declared it itself. The alias declaration may not add or override any data in the type table it points to.
Inheriting types
It is possible to predefine several types for a location by inheriting them from another module. In this example, the module for Albania inherits all of the specified types from the Europe module.
-- Albania
local ALB = {}
local util = require("Module:Road data/util")
util.addAll(ALB, require("Module:Road data/strings/EUR"))
Only one module may be inherited at this time.
Advanced uses
It is possible to create multiple types based on a specified pattern using ipairs. In this example from Module:Road data/strings/USA/WA, the US 1926, US 1948, and US 1961 types are all created from the same code. At the bottom that is an override for US 1961's shieldmain.
for _,year in ipairs({"1926", "1948", "1961"}) do
WA["US " .. year] = {
shield = format("US %%route%% (%s).svg", year),
shieldmain = format("US %%route%% Washington %s.svg", year),
base = WA.US.base,
name = WA.US.name,
link = WA.US.link,
abbr = WA.US.abbr,
width = "square",
}
end
WA["US 1961"].shieldmain = "US %route% (1961).svg"
Similarly, subtypes can be created in the same manner. This example creates 9 subtypes each for WA and SR. The aux is inherited from Module:Road data/strings/USA. That, in turn, modifies auxType and spec accordingly.
for _,type in ipairs({'WA', 'SR'}) do
for _,auxType in ipairs({"Alt", "Bus", "Byp", "Conn", "Opt", "Scenic", "Spur", "Temp", "Truck"}) do
local spec = WA[" aux "][auxType]
WA[type .. "-" .. auxType] = {
shield = WA[type].shield,
shieldmain = WA[type].shieldmain,
name = WA[type].name .. " " .. spec.name,
link = WA[type].link .. " " .. spec.name .. suffix,
abbr = WA[type].abbr .. " " .. spec.abbrsuffix,
banner = spec.bannerprefix .. " plate.svg",
aux = spec.aux,
width = WA[type].width
}
end
end
Style
There are a few style guidelines that should be followed:
- Align table fields using tabs. All tables should be aligned so that fields line up with each other, as shown in the above examples.
- Each table field should be on its own line.
- Add spaces to either side of an assignment operator (equals sign).
- Leave a blank line between types. Type aliases should be set off from their base type by a blank line, but no blank lines should be placed between the aliases themselves.
--[==[
To inspect the content of this data module, use [[Special:ExpandTemplates]]
and enter the following input text:
{{#invoke:Road data/dump|dump|module=Module:<name-of-this-module>}}
To inspect the content of this data module when editing, enter the following
into the Debug console:
local util = require("Module:Road data/util")
print(util.arrayToString(p))
To inspect a particular route type, change `p` above to include the route type,
e.g., `p.I` and `p["US-Hist"]`.
]==]
-- Oregon
local OR = {}
local util = require("Module:Road data/util")
util.addAll(OR, require("Module:Road data/strings/USA"))
local suffix = " ([dab||%dab%, |]Oregon)"
local maint = "[[Oregon Department of Transportation|ODOT]]"
OR[" common "] = {
browse = {
{link = "State highways in Oregon", name = "Oregon Highways", bold = true},
{
noprint = true,
{link = "List of Interstate Highways in Oregon", name = "Interstate"},
{link = "List of U.S. Highways in Oregon", name = "U.S."},
{link = "List of highway route numbers in Oregon", name = "State"},
{link = "List of named state highways in Oregon", name = "Named"},
{link = "Oregon State Scenic Byways", name = "Scenic"}
}
}
}
OR.I.maint = maint
OR.I.link = {["82"] = "Interstate 82",
["205"] = "Interstate 205 (Oregon–Washington)",
default = {hook = "splitlen",
split = 3,
above = "Interstate %route% (Oregon)",
below = "Interstate %route% in Oregon"}}
OR["I 1957"].link = OR.I.link
OR["I 1961"].link = OR.I.link
OR["I 1961"].shield = { ["80N"] = "I-%route% (1957).svg",
default = { hook = "splitlen",
split = 3,
above = "I-%route% (1961).svg",
below = "I-%route% (1957).svg"}}
OR.BL.link = "Interstate %route% Business ([dab||%dab%, |]Oregon)"
OR.US.maint = maint
OR.US.name = "U.S. Highway %route%"
OR.US.link = {["28"] = "U.S. Route 28",
["126"] = "U.S. Route 126",
["197"] = "U.S. Route 197",
["199"] = "U.S. Route 199",
["630"] = "U.S. Route 630",
["730"] = "U.S. Route 730",
default = "U.S. Route %route% in Oregon"}
OR["US-Alt"].link = OR.US.base .. " Alternate" .. suffix
OR["US-Bus"].link = OR.US.base .. " Business" .. suffix
OR["US-Byp"].link = OR.US.base .. " Bypass" .. suffix
OR["US-Spur"].link = OR.US.base .. " Spur" .. suffix
for _,year in ipairs({"1926", "1948", "1961"}) do
local oldUSmain = "US " .. year
OR[oldUSmain].name = OR.US.name
OR[oldUSmain].link = OR.US.link
end
OR["US 1961-Alt"] = {shield = OR["US 1961"].shield,
link = OR["US-Alt"].link,
abbr = OR["US-Alt"].abbr,
banner = "Alternate plate.svg"}
OR.OR = {shield = "OR %route%.svg",
link = "Oregon Route %route% [dab||(%dab%)|]",
abbr = "OR %route%",
width = "expand"}
OR["OR-Bus"] = {shield = OR.OR.shield,
link = "Oregon Route %route% Business [dab||(%dab%)|]",
abbr = OR.OR.abbr .. " Bus.",
banner = "Business plate.svg",
width = "expand"}
OR["OR-Spur"] = {shield = OR.OR.shield,
link = "Oregon Route %route% Spur [dab||(%dab%)|]",
abbr = OR.OR.abbr .. " Spur",
banner = "Spur plate.svg",
width = "expand"}
OR["OR 1932"] = {shield = "OR %route% 1932.svg",
link = OR.OR.link,
abbr = OR.OR.abbr}
OR["OR 1948"] = {shield = "OR %route% 1948.svg",
link = OR.OR.link,
abbr = OR.OR.abbr}
OR.FH = {shield = "Forest Route %route%.svg",
link = "",
abbr = "FH %route%"}
OR.CA = {alias = {module = "USA/CA", type = "SR"}}
OR.WA = {alias = {module = "USA/WA", type = "WA"}}
OR.ID = {alias = {module = "USA/ID", type = "SH"}}
OR.NV = {alias = {module = "USA/NV", type = "NV"}}
local highwayNames = {["1"] = "Pacific Highway",
["2"] = "Columbia River",
["3"] = "Oswego",
["4"] = "The Dalles–California",
["5"] = "John Day",
["6"] = "Old Oregon Trail",
["7"] = "Central Oregon",
["8"] = "Oregon–Washington",
["9"] = "Oregon Coast",
["10"] = "Wallowa Lake",
["11"] = "Enterprise–Lewiston",
["12"] = "Baker–Copperfield",
["14"] = "Crooked River",
["15"] = "McKenzie",
["16"] = "Santiam",
["17"] = "McKenzie–Bend",
["18"] = "Willamette",
["19"] = "Fremont",
["20"] = "Klamath Falls–Lakeview",
["21"] = "Green Springs",
["22"] = "Crater Lake",
["23"] = "Dairy–Bonanza",
["25"] = "Redwood",
["26"] = "Mt. Hood",
["27"] = "Alsea",
["28"] = "Pendleton–John Day",
["29"] = "Tualatin Valley",
["30"] = "Willamina–Salem",
["31"] = "Albany–Corvallis",
["32"] = "Three Rivers",
["33"] = "Corvallis–Newport",
["35"] = "Coos Bay–Roseburg",
["36"] = "Pendleton–Cold Springs",
["37"] = "Wilson River",
["38"] = "Oregon Caves",
["39"] = "Salmon River",
["40"] = "Beaverton–Hillsdale",
["41"] = "Ochoco",
["42"] = "Sherman",
["43"] = "Monmouth–Independence",
["44"] = "Wapinitia",
["45"] = "Umpqua",
["46"] = "Necanicum",
["47"] = "Sunset",
["48"] = "John Day–Burns",
["49"] = "Lakeview–Burns",
["50"] = "Klamath Falls–Malin",
["51"] = "Wilsonville–Hubbard",
["52"] = "Heppner",
["53"] = "Warm Springs",
["54"] = "Umatilla–Stanfield",
["58"] = "Albany–Junction City",
["60"] = "Rogue River",
["61"] = "Stadium Freeway",
["62"] = "Florence–Eugene",
["63"] = "Rogue Valley",
["64"] = "East Portland Freeway",
["66"] = "La Grande–Baker",
["67"] = "Pendleton",
["68"] = "Cascade",
["69"] = "Beltline",
["70"] = "McNary",
["71"] = "Whitney",
["72"] = "Salem",
["75"] = "Sunrise Expressway",
["81"] = "Pacific",
["91"] = "Pacific",
["92"] = "Lower Columbia River",
["100"] = "Historic Columbia River",
["102"] = "Nehalem",
["103"] = "Fishhawk Falls",
["104"] = "Fort Stevens",
["105"] = "Warrenton–Astoria",
["110"] = "Mist–Clatskanie",
["120"] = "Swift",
["123"] = "Northeast Portland",
["130"] = "Little Nestucca",
["131"] = "Netarts",
["132"] = "Delta",
["138"] = "North Umpqua",
["140"] = "Hillsboro–Silverton",
["141"] = "Beaverton–Tualatin",
["142"] = "Farmington",
["143"] = "Scholls",
["144"] = "Beaverton–Tigard",
["150"] = "Salem–Dayton",
["151"] = "Yamhill–Newberg",
["153"] = "Bellevue–Hopewell",
["154"] = "Lafayette",
["155"] = "Amity–Dayton",
["157"] = "Willamina–Sheridan",
["160"] = "Cascade",
["161"] = "Woodburn–Estacada",
["162"] = "North Santam",
["163"] = "Silver Creek Falls",
["164"] = "Jefferson",
["171"] = "Clackamas",
["172"] = "Eagle Creek–Sandy",
["173"] = "Timberline",
["174"] = "Clackamas–Boring",
["180"] = "Eddyville–Blodgett",
["181"] = "Siletz",
["189"] = "Dallas–Rickreall",
["191"] = "Kings Valley",
["193"] = "Independence",
["194"] = "Monmouth",
["200"] = "Territorial",
["201"] = "Alsea–Deadwood",
["210"] = "Corvallis–Lebanon",
["211"] = "Albany–Lyons",
["212"] = "Halsey–Sweet Home",
["215"] = "Clear Lake–Belknap Springs",
["225"] = "McVay",
["226"] = "Goshen–Divide",
["227"] = "Eugene–Springfield",
["228"] = "Springfield",
["229"] = "Mapleton–Junction City",
["231"] = "Elkton–Sutherlin",
["233"] = "West Diamond Lake",
["240"] = "Cape Arago",
["241"] = "Coos River",
["242"] = "Powers",
["244"] = "Coquille–Bandon",
["250"] = "Cape Blanco",
["251"] = "Port Orford",
["255"] = "Carpenterville",
["260"] = "Rogue River Loop",
["270"] = "Lake of the Woods",
["271"] = "Sams Valley",
["272"] = "Jacksonville",
["273"] = "Siskiyou",
["281"] = "Hood River",
["282"] = "Odell",
["290"] = "Sherars Bridge",
["291"] = "Shaniko–Fossil",
["292"] = "Mosier–The Dalles",
["293"] = "Antelope",
["300"] = "Wasco–Heppner",
["301"] = "Celilo–Wasco",
["320"] = "Lexington–Echo",
["321"] = "Heppner–Spray",
["330"] = "Weston–Elgin",
["331"] = "Umatilla Mission",
["332"] = "Sunnyside–Umapine",
["333"] = "Hermiston",
["334"] = "Athena–Holdman",
["335"] = "Havana–Helix",
["339"] = "Freewater",
["340"] = "Medical Springs",
["341"] = "Ukiah–Hilgard",
["342"] = "Cove",
["350"] = "Little Sheep Creek",
["351"] = "Joseph–Wallowa Lake",
["360"] = "Madras–Prineville",
["361"] = "Culver",
["370"] = "O'Neil",
["372"] = "Century Drive",
["380"] = "Paulina",
["390"] = "Service Creek–Mitchell",
["402"] = "Kimberly–Long Creek",
["410"] = "Sumpter",
["413"] = "Halfway–Cornucopia",
["414"] = "Pine Creek",
["415"] = "Dooley Mountain",
["420"] = "Midland",
["422"] = "Chiloquin",
["424"] = "South Klamath Falls",
["426"] = "Hatfield",
["429"] = "Crescent Lake",
["431"] = "Warner",
["440"] = "Frenchglen",
["442"] = "Steens",
["449"] = "Huntington",
["450"] = "Succor Creek",
["451"] = "Vale–West",
["453"] = "Adrian–Arena Valley",
["454"] = "Adrian–Caldwell",
["455"] = "Olds Ferry–Ontario",
["456"] = "I.O.N.",
["457"] = "Snake River Correctional Institution",
["481"] = "Baker–Copperfield",
["482"] = "Redwood",
["483"] = "McMinnville",
["484"] = "Esplanade",
["485"] = "Fort Stevens",
["486"] = "Gold Hill",
["488"] = "Chiloquin",
["487"] = "Celilo–Wasco",
["489"] = "Parma",
["490"] = "Homedale",
["491"] = "Weiser",
["492"] = "Payette",
["493"] = "Ontario" }
local highwaySuffix = { default = " No. %route%",
["68"] = " North No. %route%",
["81"] = " East No. %route%",
["91"] = " West No. %route%",
["138"] = " East No. %route%",
["160"] = " South No. %route%"}
return OR