Peripheral Component Interconnect (in practice almost always shortened to PCI) is a computer bus standard for attaching peripheral devices to a computer motherboard (a so-called local bus). These devices can be integrated circuits fitted on the motherboard itself (called planar devices in the PCI specification) or expansion cards that fit in sockets. It is common in PCs, where it has displaced ISA as the standard bus, but is also used in other computer types. Unlike ISA buses, the PCI bus enables dynamic configuration of a peripheral device. At boot up time the PCI card's BIOS and the system BIOS interact and negotiate the resources that are requested by the PCI card.This enables allocation of IRQ's and port addresses a dynamic process unlike the ISA bus where IRQ's had to be configured manually using external jumpers. Apart from this the PCI bus provides a detailed description of all the connected PCI devices through the PCI Configuration Space.
The PCI specification covers physical size of the bus (including wire spacing), electrical characteristics, bus timing and protocols. It can be bought from the PCI Special Interest Group (PCISIG) at http://www.pcisig.com/.
Basic PCI Bus Specifications
- 33MHz clock with synchronous transfers
- peak transfer rate of 132MB per second
- 32-bit bus width
- 32-bit address space (4G bytes)
- 3.3 volt or 5 volt signalling
Basic PCI Variants
Other PCI Variants
- PCI-Express (or 3GIO), a serial bus using PCI signalling and programming concepts
See also: