Fortran

Fortran
The Fortran Automatic Coding System for the IBM 704 (October 15, 1956), the first Programmer's Reference Manual for Fortran
Paradigm	multi-paradigm: procedural, imperative, structured, object-oriented
Designed by	John W. Backus
Developer	John W. Backus & IBM
First appeared	1957
Stable release	Fortran 2003 / 2003
Typing discipline	strong, static
Website	fortran-lang.org
Major implementations
Absoft, GFortran, G95, Intel, Lahey/Fujitsu, Open Watcom, Pathscale, PGI, Silverfrost, Sun, XL Fortran, others
Influenced
ALGOL 58, PL/I

Fortran (previously FORTRAN) is a general-purpose, procedural, imperative programming language that is especially suited to numeric computation and scientific computing. Originally developed by IBM in the 1950s for scientific and engineering applications, Fortran came to dominate this area of programming early on and has been in continual use for over half a century in computationally intensive areas such as climate modelingTemplate:PDFlink, computational fluid dynamics (CFD), computational physics, financial computing, and computational chemistry.

Fortran (a portmanteau derived from The IBM Mathematical Formula Translating System) encompasses a lineage of versions, each of which evolved to add extensions to the language while retaining compatibility with previous versions. Successive versions have added support for processing of character-based data (FORTRAN 77), array programming, module-based programming and object-based programming (Fortran 90 / 95), and object-oriented and generic programming (Fortran 2003).

History

An IBM 704 mainframe (image courtesy of LLNL)

FORTRAN code on a punch card, showing the specialized uses of columns 1-5, 6 and 73-80.

In late 1953, John W. Backus submitted a proposal to his superiors at IBM to develop a more efficient alternative to assembly language for programming their IBM 704 mainframe computer. A draft specification for The IBM Mathematical Formula Translating System was completed by mid-1954. The first manual for FORTRAN appeared in October 1956, with the first FORTRAN compiler delivered in April 1957. This was an optimizing compiler, because customers were reluctant to use a high-level programming language unless its compiler could generate code whose performance was comparable to that of hand-coded assembly language.

While the community was skeptical that this new method could possibly out-perform hand-coding, it reduced the amount of programming statements necessary to operate a machine by a factor of 20, and quickly gained acceptance. Said creator John Backus during a 1979 interview with Think, the IBM employee magazine, "Much of my work has come from being lazy. I didn't like writing programs, and so, when I was working on the IBM 701 (an early computer), writing programs for computing missile trajectories, I started work on a programming system to make it easier to write programs," http://www.msnbc.msn.com/id/17704662/

The language was widely adopted by scientists for writing numerically intensive programs, which encouraged compiler writers to produce compilers that could generate faster and more efficient code. The inclusion of a complex number data type in the language made Fortran especially suited to technical applications such as electrical engineering.

By 1960, versions of FORTRAN were available for the IBM 709, 650, 1620, and 7090 computers. Significantly, the increasing popularity of FORTRAN spurred competing computer manufacturers to provide FORTRAN compilers for their machines, so that by 1963 over 40 FORTRAN compilers existed. For these reasons, FORTRAN is considered to be the first widely used programming language supported across a variety of computer architectures.

The development of FORTRAN paralleled the early evolution of compiler technology; indeed many advances in the theory and design of compilers were specifically motivated by the need to generate efficient code for FORTRAN programs.

FORTRAN

The initial release of FORTRAN for the IBM 704 contained 32 statements, including:

• DIMENSION and EQUIVALENCE statements
• Assignment statements
• Three-way arithmetic IF statement.
• IF statements for checking exceptions (ACCUMULATOR OVERFLOW, QUOTIENT OVERFLOW, and DIVIDE CHECK); and IF statements for manipulating sense switches and sense lights
• GOTO, computed GOTO, ASSIGN, and assigned GOTO
• DO loops
• Formatted I/O: FORMAT, READ, READ INPUT TAPE, WRITE, WRITE OUTPUT TAPE, PRINT, and PUNCH
• Unformatted I/O: READ TAPE, READ DRUM, WRITE TAPE, and WRITE DRUM
• Other I/O: END FILE, REWIND, and BACKSPACE
• PAUSE, STOP, and CONTINUE
• FREQUENCY statement (for providing optimization hints to the compiler)

FORTRAN II

IBM's FORTRAN II appeared in 1958. The main enhancement was to support procedural programming by allowing user-written subroutines and functions. Six new statements were introduced:

• SUBROUTINE, FUNCTION, and END
• CALL and RETURN
• COMMON

Over the next few years, FORTRAN II would also add support for the DOUBLE PRECISION and COMPLEX data types.

FORTRAN III

A FORTRAN coding form, formerly printed on paper and intended to be used by programmers to prepare programs for punching onto cards by card punch operators. Now obsolete.

IBM also developed a FORTRAN III in 1958 that allowed for inline assembler code among other features; however, this version was never released as a product. Like the 704 FORTRAN and FORTRAN II, FORTRAN III included machine-dependent features that made code written in it unportable from machine to machine. Early versions of FORTRAN provided by other vendors suffered from the same disadvantage.

FORTRAN IV

Starting in 1961, as a result of customer demands, IBM began development of a FORTRAN IV that removed the machine-dependent features of FORTRAN II (such as READ INPUT TAPE), while adding new features such as a LOGICAL data type, logical Boolean expressions and the logical IF statement as an alternative to the arithmetic IF statement. FORTRAN IV was eventually released in 1962, first for the IBM 7030 ("Stretch") computer, followed by versions for the IBM 7090 and IBM 7094.

By 1965, Fortran IV was supposed to be the "standard" and in compliance with American Standards Association X3.4.3 FORTRAN Working Group.

FORTRAN 66

Perhaps the most significant development in the early history of FORTRAN was the decision by the American Standards Association (now ANSI) to form a committee to develop an "American Standard Fortran." The resulting two standards, approved in March 1966, defined two languages, FORTRAN (based on FORTRAN IV, which had served as a de facto standard), and Basic FORTRAN (based on FORTRAN II, but stripped of its machine-dependent features). The FORTRAN defined by the first standard became known as FORTRAN 66 (although many continued to refer to it as FORTRAN IV, the language upon which the standard was largely based). FORTRAN 66 effectively became the first "industry-standard" version of FORTRAN. FORTRAN 66 included:

• Main program, SUBROUTINE, FUNCTION, and BLOCK DATA program units
• INTEGER, REAL, DOUBLE PRECISION, COMPLEX, and LOGICAL data types
• COMMON, DIMENSION, and EQUIVALENCE statements
• DATA statement for specifying initial values
• Intrinsic and EXTERNAL (e.g., library) functions
• Assignment statement
• GOTO, assigned GOTO, and computed GOTO statements
• Logical IF and arithmetic (three-way) IF statements
• DO loops
• READ, WRITE, BACKSPACE, REWIND, and ENDFILE statements for sequential I/O
• FORMAT statement
• CALL, RETURN, PAUSE, and STOP statements
• Hollerith constants in DATA and FORMAT statements, and as actual arguments to procedures
• Identifiers of up to six characters in length
• Comment lines

FORTRAN 77

After the release of the FORTRAN 66 standard, compiler vendors introduced a number of extensions to "Standard Fortran", prompting ANSI in 1969 to begin work on revising the 1966 standard. Final drafts of this revised standard circulated in 1977, leading to formal approval of the new FORTRAN standard in April 1978. The new standard, known as FORTRAN 77, added a number of significant features to address many of the shortcomings of FORTRAN 66:

• Block IF and END IF statements, with optional ELSE and ELSE IF clauses, to provide improved language support for structured programming
• DO loop extensions, including parameter expressions, negative increments, and zero trip counts
• OPEN, CLOSE, and INQUIRE statements for improved I/O capability
• Direct-access file I/O
• IMPLICIT statement
• CHARACTER data type, with vastly expanded facilities for character input and output and processing of character-based data
• PARAMETER statement for specifying constants
• SAVE statement for persistent local variables
• Generic names for intrinsic functions
• A set of intrinsics (LGE, LGT, LLE, LLT) for lexical comparison of strings, based upon the ASCII collating sequence.

(ASCII functions were demanded by the U. S. Department of Defense, in their conditional approval vote.)

In this revision of the standard, a number of features were removed or altered in a manner that might invalidate previously-standard-conforming programs. (Removal was the only allowable alternative to X3J3 at that time, since the concept of "deprecation" was not yet available for ANSI standards.) While most of the 24 items in the conflict list (See Appendix A2 of X3.9-1978) addressed loopholes or pathological cases permitted by the previous standard but rarely used, a small number of specific capabilities were deliberately removed, such as:

• Hollerith constants and Hollerith data, such as:

GREET = 12HHELLO THERE!

• Reading into a H edit (Hollerith field) descriptor in a FORMAT specification.
• Overindexing of array bounds by subscripts.

DIMENSION A(10,5)

Y= A(11,1)

• Transfer of control into the range of a DO loop (also known as "Extended Range").

An important practical extension to FORTRAN 77 was the release of MIL-STD-1753 in 1978. This specification, developed by the U. S. Department of Defense, standardized a number of features implemented by most FORTRAN 77 compilers but not included in the ANSI FORTRAN 77 standard. These features would eventually be incorporated into the Fortran 90 standard.

• DO WHILE and END DO statements
• INCLUDE statement
• IMPLICIT NONE variant of the IMPLICIT statement
• Bit manipulation intrinsic functions, based on similar functions included in Industrial Real-Time Fortran (ANSI/ISA S61.1 (1976))

The IEEE 1003.9 POSIX Standard, released in 1991, provided a simple means for Fortran-77 programmers to issue POSIX system calls. Over 100 calls were defined in the document - allowing access to POSIX-compatible process control, signal handling, file system control, device control, procedure pointing, and stream I/O in a portable manner.

The development of a revised standard to succeed FORTRAN 77 would be repeatedly delayed as the standardization process struggled to keep up with rapid changes in computing and programming practice. In the meantime, as the "Standard FORTRAN" for nearly fifteen years, FORTRAN 77 would become the historically most important dialect.

Fortran 90

The much delayed successor to FORTRAN 77, informally known as Fortran 90, was finally released as an ANSI Standard in 1992. This major revision added many new features to reflect the significant changes in programming practice that had evolved since the 1978 standard:

• Free-form source input, also with lowercase Fortran keywords
• Identifiers up to 31 characters in length
• Inline comments
• Ability to operate on arrays (or array sections) as a whole, thus greatly simplifying math and engineering computations.
  • whole, partial and masked array assignment statements and array expressions, such as   X(1:N)=R(1:N)*COS(A(1:N)))
  • WHERE statement for selective array assignment)
  • array-valued constants and expressions,
  • user-defined array-valued functions and array constructors.
• RECURSIVE procedures
• Modules, to group related procedures and data together, and make them available to other program units, including the capability to limit the accessibility to only specific parts of the module.
• A vastly improved argument-passing mechanism, allowing interfaces to be checked at compile time
• User-written interfaces for generic procedures
• Operator overloading
• Derived/abstract data types
• New data type declaration syntax, to specify the data type and other attributes of variables
• Dynamic memory allocation by means of the ALLOCATABLE attribute and the ALLOCATE and DEALLOCATE statements
• POINTER attribute, pointer assignment, and NULLIFY statement to facilitate the creation and manipulation of dynamic data structures
• Structured looping constructs, with an END DO statement for loop termination, and EXIT and CYCLE statements for "breaking out" of normal DO loop iterations in an orderly way
• SELECT . . . CASE construct for multi-way selection
• Portable specification of numerical precision under the user's control
• New and enhanced intrinsic procedures.

Obsolescence & Deletions

Unlike the previous revision, Fortran 90 did not delete any features. (Appendix B.1 says, "The list of deleted features in this standard is empty.") Any standard-conforming FORTRAN 77 program is also standard-conforming under Fortran 90, and either standard should be usable to define its behavior.

A small set of features were identified as "obsolescent" and expected to be removed in a future standard.

Obsolescent feature	Example	Status / 95
Arithmetic IF-statement	IF (X) 10, 20, 30
Non-integer DO parameters or control variables	DO 9, X= 1.7, 1.6, -0.1	Deleted
Shared DO-loop termination or termination with a statement other than END DO or CONTINUE	DO 9, J= 1, 10         DO 9, K= 1, 10 9   L= J + K
Branching to END IF from outside a block	66  GO TO 77 ; . . .     IF (E) THEN ;     . . . 77  END IF	Deleted
Alternate return	CALL SUBR( X, Y *100, *200 )
PAUSE statement	PAUSE 600	Deleted
ASSIGN statement   and assigned GO TO statement	100  . . .     ASSIGN 100 TO H     . . .     GO TO H . . .	Deleted
Assigned FORMAT specifiers	ASSIGN F TO 606	Deleted
H edit descriptors	606 FORMAT ( 9H1GOODBYE. )	Deleted
Computed GO TO statement	GO TO (10, 20, 30, 40) index	(Obso.)
Statement functions	FOIL( X, Y )= X**2 + X*Y + Y**2	(Obso.)
DATA statements   among executable statements	X= 27.3     DATA A, B, C / 5.0, 12.0. 13.0 /     . . .	(Obso.)
CHARACTER* form of CHARACTER declaration	CHARACTER*8 STRING   ! Use CHARACTER(8)	(Obso.)
Assumed character length functions
Fixed form source code	* Column 1 contains * or ! or C for comments. C       Column 6 for continuation.

Fortran 95

Fortran 95 was a minor revision, mostly to resolve some outstanding issues from the Fortran 90 standard. Nevertheless, Fortran 95 also added a number of extensions, notably from the High Performance Fortran specification:

• FOR ALL and nested WHERE constructs to aid vectorization
• User-defined PURE and ELEMENTAL procedures

An important supplement to Fortran 95 was the ISO technical report TR-15581: Enhanced Data Type Facilities, informally known as the Allocatable TR. This specification defined enhanced use of ALLOCATABLE arrays, prior to the availability of fully Fortran 2003-compliant Fortran compilers. Such uses include ALLOCATABLE arrays as derived type components, in procedure dummy argument lists, and as function return values. (ALLOCATABLE arrays are preferable to POINTER-based arrays because ALLOCATABLE arrays are guaranteed by Fortran 95 to be deallocated automatically when they go out of scope, eliminating the possibility of memory leakage. In addition, aliasing is not an issue for optimization of array references, allowing compilers to generate faster code than in the case of pointers.)

Another important supplement to Fortran 95 was the ISO technical report TR-15580: Floating-point exception handling, informally known as the IEEE TR. This specification defined support for IEEE floating-point arithmetic and floating point exception handling.

Conditional Compilation and Varying length strings

In addition to the mandatory "Base language" (defined in ISO/IEC 1539-1 : 1997), the Fortran 95 language also includes two optional modules:

• Varying character strings (ISO/IEC 1539-2 : 2000)
• Conditional compilation (ISO/IEC 1539-3 : 1998)

which, together, comprise the multi-part International Standard (ISO/IEC 1539).

According to the standards developers, "the optional parts describe self-contained features which have been requested by a substantial body of users and/or implementors, but which are not deemed to be of sufficient generality for them to be required in all standard-conforming Fortran compilers." Nevertheless, if a standard-conforming Fortran does provide such options, then they "must be provided in accordance with the description of those facilities in the appropriate Part of the Standard."

Fortran 2003

The most recent standard, Fortran 2003, is a major revision introducing many new features. A comprehensive summary of the new features of Fortran 2003 is available at the ISO Fortran Working Group (WG5) official Web site, and may be downloaded directly as a Template:PDFlink or gzipped PostScript file.

From that article, the major enhancements for this revision include:

• Derived type enhancements: parameterized derived types, improved control of accessibility, improved structure constructors, and finalizers.
• Object oriented programming support: type extension and inheritance, polymorphism, dynamic type allocation, and type-bound procedures.
• Data manipulation enhancements: allocatable components (incorporating TR 15581), deferred type parameters, VOLATILE attribute, explicit type specification in array constructors and allocate statements, pointer enhancements, extended initialization expressions, and enhanced intrinsic procedures.
• Input/output enhancements: asynchronous transfer, stream access, user specified transfer operations for derived types, user specified control of rounding during format conversions, named constants for preconnected units, the FLUSH statement, regularization of keywords, and access to error messages.
• Procedure pointers.
• Support for IEEE floating-point arithmetic and floating point exception handling (incorporating TR 15580).
• Interoperability with the C programming language.
• Support for international usage: access to ISO 10646 4-byte characters and choice of decimal or comma in numeric formatted input/output.
• Enhanced integration with the host operating system: access to command line arguments, environment variables, and processor error messages.

Fortran 2008

Efforts are underway to develop a revision to Fortran 2003, tentatively called Fortran 2008. As with Fortran 95, this is intended to be a minor upgrade, incorporating clarifications and corrections to Fortran 2003, as well as introducing a select few new capabilities. Proposed new capabilities include

• Co-array Fortran – a parallel processing model
• BIT data type

A full list is in the report "The language features that have been chosen for Fortran 2008" Template:PDFlink.

The legacy of FORTRAN

Since Fortran has been in use for nearly fifty years, there is a vast body of Fortran in daily use throughout the scientific and engineering communities. It is the primary language for some of the most intensive supercomputing tasks, such as weather and climate modeling, computational fluid dynamics, computational chemistry, quantum chromodynamics, simulations of long-term solar system dynamics, high-fidelity evolution artificial satellite orbits, and simulation of automobile crash dynamics. Indeed, one finds that even today, half a century later, floating-point benchmarks to gauge the performance of new computer processors are still written in Fortran (e.g., CFP2000, the floating-point component of the SPEC CPU2000 benchmarks).

Language features

The Fortran language features described are intended to be a fairly comprehensive overview of the Fortran language; full details may be found in any of several Fortran textbooks. Only those features widely used in new programs are described, as few of the historic features are used in modern programs. Still, most have been retained in the language to maintain backward compatibility.

Further information: Fortran language features

Portability

Portability was a problem in the early days because there was no agreed standard—not even IBM's reference manual—and computer companies vied to differentiate their offerings from others by providing incompatible features. Standards have improved portability. The 1966 standard provided a reference syntax and semantics, but vendors continued to provide incompatible extensions. Although careful programmers were coming to realize that use of incompatible extensions caused expensive portability problems, and were therefore using programs such as The PFORT Verifier, it was not until after the 1977 standard, when the National Bureau of Standards (now NIST) published FIPS PUB 69, that processors purchased by the U.S. Government were required to diagnose extensions of the standard. Rather than offer two processors, essentially every compiler eventually had at least an option to diagnose extensions.

Incompatible extensions were not the only portability problem. For numerical calculations, it is important to take account of the characteristics of the arithmetic. This was addressed by Fox et al. in the context of the 1966 standard by the PORT library. The ideas therein became widely used, and were eventually incorporated into the 1990 standard by way of intrinsic inquiry functions. The widespread (now almost universal) adoption of the IEEE 754 standard for binary floating-point arithmetic has essentially removed this problem.

Access to the computing environment (e.g. the program's command line, environment variables, textual explanation of error conditions) remained a problem until it was addressed by the 2003 standard.

Large collections of "library" software that could be described as being loosely-related to engineering and scientific calculations, such as graphics libraries, have been written in C, and therefore access to them presented a portability problem. This has been addressed by incorporation of C interoperability into the 2003 standard.

It is now possible (and relatively easy) to write an entirely portable program in Fortran, even without recourse to a preprocessor.

Variants of Fortran

Specific variants

Vendors of high-performance scientific computers (e.g., Burroughs, CDC, Cray, Honeywell, IBM, Texas Instruments, and UNIVAC) added extensions to Fortran to take advantage of special hardware features such as instruction cache, CPU pipelines, and vector arrays. For example, one of IBM's FORTRAN compilers (H Extended IUP) had a level of optimization which reordered the machine language instructions to keep multiple internal arithmetic units busy simultaneously. Another example is CFD, a special variant of Fortran designed specifically for the ILLIAC IV supercomputer, running at NASA's Ames Research Center.

Object-Oriented Fortran was an object-oriented extension of Fortran, in which data items can be grouped into objects, which can be instantiated and executed in parallel. It was available for Sun, Iris, iPSC, and nCUBE, but is no longer supported.

Such machine-specific extensions have either disappeared over time or have had elements incorporated into the main standards; the major remaining extension is OpenMP, which is a cross-platform extension for shared memory programming. One new extension, CoArray Fortran, is intended to support parallel programming.

Fortran-based languages

Prior to FORTRAN 77, a number of preprocessors were commonly used to provide a friendlier language, with the advantage that the preprocessed code could be compiled on any machine with a standard FORTRAN compiler. Popular preprocessors included FLECS, MORTRAN, Ratfor, and Ratfiv. (Ratfor and Ratfiv, for example, implemented a remarkably C-like language, outputting preprocessed code in standard FORTRAN 66.)

The Fortran-95 Standard includes an optional Part 3 which defines an optional conditional compilation capability. This capability is often referred to as "CoCo".

Many Fortran compilers have integrated subsets of the C preprocessor into their systems.

SIMSCRIPT is an application specific Fortran preprocessor for modeling and simulating large discrete systems.

F was designed to be a clean subset of Fortran 95 that attempted to remove the redundant, unstructured, and deprecated features of Fortran, such as the EQUIVALENCE statement.

Code examples

The sample programs can be compiled and run with any standard Fortran compiler (see the end of this article for lists of compilers). Most modern Fortran compilers expect a file with a .f or .for extension (for FORTRAN 66 or FORTRAN 77 fixed-form source, although the FORTRAN 66 dialect may have to be selected specifically with a command-line option) or .f90/.f95 extension (for Fortran 90/95 free-form source, respectively).

Further information: Fortran code examples

FORTRAN quotations

For a programming language with a half-century legacy, FORTRAN not surprisingly has accumulated its share of jokes and folklore.

From the historical record

• God is Real, unless declared Integer.[1] J.Allan Toogood, FORTRAN programmer. In FORTRAN, undeclared variables are typed according to their first letter, so "God" would be a real number.

• FORTRAN, the infantile disorder, by now nearly 20 years old, is hopelessly inadequate for whatever computer application you have in mind today: it is now too clumsy, too risky, and too expensive to use. —Edsger Dijkstra, circa 1970.

• "The sooner the world forgets that FORTRAN ever existed, the better." (imputed to Joseph Weizenbaum)

• "95 percent of the people who programmed in the early years would never have done it without Fortran." - Ken Thompson, circa 2005

• "The primary purpose of the DATA statement is to give names to constants; instead of referring to pi as 3.141592653589793 at every appearance, the variable PI can be given that value with a DATA statement and used instead of the longer form of the constant. This also simplifies modifying the program, should the value of pi change." —Early FORTRAN manual for Xerox Computers

• "Consistently separating words by spaces became a general custom about the tenth century A.D., and lasted until about 1957, when FORTRAN abandoned the practice." —Sun FORTRAN Reference Manual

• "People are very flexible and learn to adjust to strange surroundings — they can become accustomed to read Lisp and Fortran programs, for example." —Art of PROLOG, Leon Sterling and Ehud Shapiro, MIT Press

• "Warning: Go directly to Jail. Do not pass GO. Do not collect $200." - Easter egg in the SDS/Xerox Sigma 7 FORTRAN compiler, when the statement GO TO JAIL was encountered. The message is from a Chance card in Monopoly.

References in popular culture

• In the pilot episode of the Futurama series, the robot Bender drinks a bottle of Olde FORTRAN Malt Liquor (alluding to "Olde English" malt liquor)

• Computer folklore has incorrectly attributed the loss of the Mariner I space probe to a typographical error in a Fortran program. For example, "Recall the first American space probe to Venus, reportedly lost because Fortran cannot recognize a missing comma in a DO statement ..." .
• In 1982, 10,000 Maniacs released a song named "Planned Obsolescence" that includes the repeated line - "Science [is] truth for life, in Fortran tongue the answer".

FORTRAN Anecdotes

FORTRAN II on the IBM 1401 and 1460

The IBM 1401 computer, introduced in 1959, supported Fortran by the middle 1960s although the 1401 was intended for decimal business computation and as a primitive printer "server" that would print the contents of magnetic tapes, prepared on much larger systems such as the IBM 7090.

The absolute minimum configuration was supported, for example, at Roosevelt University in Chicago until 1974 (cf. Edward G. Nilges, "Build Your Own .Net Language and Compiler", Apress 2004). This configuration was 8K of 6-bit bytes for RAM and a card reader and punch (cf. Nilges, "Anecdotes", IEEE Transactions on the History of Software, Spring/Summer 1999).

The compiler, as described below, was a series of about 100 small overlay phases (cf. John A. N. Lee, "The Anatomy of a Compiler", Van Nostrand Rheinhold 1968), where a miniature monitor stayed resident in memory to load each phase. These phases were loaded from a card deck of more than 2,000 punched cards (more than two feet long) or from a tape drive (which wasn't available at the Roosevelt University installation).

These overlays would scan and parse a "squozed" (blank-removed: run length encoded) form of the source code to produce statements in an interpretive language at the end of available memory (since the end of memory could not be sensed, it had to be spelled out on a "control card"). The final phase was responsible for interpreting the code.

Despite the primitive Fortran II compiled, which had no strings, the rather complex and flexible FORMAT statement was supported. In addition, another "control" card could specify how many decimals would be supported in floating point format; this feature looked forward to a vastly more flexible feature in today's Mathematica system.

However, for a number of years, the installation at Roosevelt University was deprived of Fortran despite the availability of the compiler "deck". At some point in time in 1970, an IBM customer engineer had "fixed" a bug, thought to result from the absence of special-purpose multiply/divide hardware (for which 1401 customers had to pay extra) by overlaying memory with a jump to a subroutine for multiplication and division.

Unfortunately, on the minimal configuration, this destroyed instructions and never worked for this reason. Roosevelt was paying for multiply and divide, so, when in 1972 the customer engineer's patch was removed, the compiler then worked. It was used for administration, teaching and research until about 1977.

The IBM 1460 (similar to the 1401) also had a Fortran II compiler that resided on tape. It required only that tape drive, a card reader/punch and a printer, i.e. no "work" devices.

The compiler for the 1401 and 1460 was in the form of a multitude of tiny phases, or segments, that were passed over the source program which was held in storage throughout the compile. The first phase read the program from the card reader, numbered the statements, and produced a source listing. The next phases might be something like "copy (and reverse) the program from low storage to high storage, assigning and replacing the names with tokens." The appearance was that the system tape containing the compiler would "blip", the computer would hum for a bit, then the tape would "blip" again and another part of the listing would appear on the printer. The end result was an object deck on the punch, and the program was left in storage and ready to go.

The effect was quite unusual, and was designed to be able to compile the largest possible program with the fewest peripheral devices.

Letter O considered harmful

During the same Fortran Standards Committee meeting at which the name "FORTRAN 77" was chosen, a technical proposal was somehow smuggled into the official distribution, bearing the title, "Letter O considered harmful". This deceptively simple proposal purported to address the confusion that sometimes arises between the letter "O" and the numeral zero, by eliminating the letter from allowable variable names. However, the method proposed was to eliminate the letter from the character set entirely (thereby retaining 48 as the number of lexical characters, which the colon had increased to 49).

Among the "PRO" arguments was the assertion that this would also promote structured programming, by making it impossible to use the notorious GO TO statement as before. (Troublesome FORMAT statements would be eliminated, as well.)

The sole "CON" argument conceded that "this might invalidate some existing programs" but noted that most of these "probably were non-conforming, anyway".

References

Textbooks

• Chapman, Stephen J. (2007). Fortran 95/2003 for Scientists and Engineers (3nd ed. ed.). McGraw-Hill. ISBN 978-0-07-319157-7. {{cite book}}: |edition= has extra text (help)

• Chapman, Stephen J. (2003). Fortran 90/95 for Scientists and Engineers (2nd ed. ed.). McGraw-Hill. ISBN 0-07-282575-8. {{cite book}}: |edition= has extra text (help)
• Chivers, Ian (2006). Introduction to Programming with Fortran (1st ed. ed.). Springer. ISBN 1-84628-053-2. {{cite book}}: |edition= has extra text (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)
• Ellis, T. M. R. (1994). Fortran 90 Programming (1st ed. ed.). Addison Wesley. ISBN 0-201-54446-6. {{cite book}}: |edition= has extra text (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)
• McCracken, Daniel D. (1961). A Guide to Fortran Programming. Wiley.
• McCracken, Daniel D. (1965). A Guide to Fortran IV Programming. Wiley.
• Metcalf, Michael (2004). Fortran 95/2003 Explained. Oxford University Press. ISBN 0-19-852693-8. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)
• Nyhoff, Larry (1995). FORTRAN 77 for Engineers and Scientists with an Introduction to Fortran 90 (4th ed. ed.). Prentice Hall. ISBN 0-13-363003-X. {{cite book}}: |edition= has extra text (help); Unknown parameter |coauthors= ignored (|author= suggested) (help)
• Martínez Baena, Javier (2006). Programación estructurada con Fortran 90/95. Universidad de Granada. ISBN 84-338-3923-3. {{cite book}}: Unknown parameter |coauthors= ignored (|author= suggested) (help)

"Core" language standards

• ANSI X3.9-1966. USA Standard FORTRAN (informally known as FORTRAN 66 ed.). American National Standards Institute.{{cite book}}: CS1 maint: numeric names: authors list (link)
• ANSI X3.9-1978. American National Standard – Programming Language FORTRAN (also known as ISO 1539-1980, informally known as FORTRAN 77 ed.). American National Standards Institute.{{cite book}}: CS1 maint: numeric names: authors list (link)
• ANSI X3.198-1992 (R1997). American National Standard – Programming Language Fortran Extended (informally known as Fortran 90 ed.). American National Standards Institute.{{cite book}}: CS1 maint: numeric names: authors list (link)
• ISO/IEC 1539-1:1997. Information technology – Programming languages – Fortran – Part 1: Base language (informally known as Fortran 95. There are a further two parts to this standard. Part 1 has been formally adopted by ANSI ed.).{{cite book}}: CS1 maint: numeric names: authors list (link)
• ISO/IEC 1539-1:2004. Information technology – Programming languages – Fortran – Part 1: Base language (informally known as Fortran 2003 ed.).{{cite book}}: CS1 maint: numeric names: authors list (link)

Related standards

• Wilfried Kneis (October 1981). "Draft standard Industrial Real-Time FORTRAN". ACM SIGPLAN Notices. 16 (7). ACM Press: 45–60.{{cite journal}}: CS1 maint: year (link)
• MIL-STD-1753. DoD Supplement to X3.9-1978. U. S. Government Printing Office.{{cite book}}: CS1 maint: numeric names: authors list (link)
• POSIX 1003.9-1992. POSIX FORTRAN 77 Language Interface – Part 1: Binding for System Application Program Interface [API]. The Institute of Electrical and Electronics Engineers, Inc.{{cite book}}: CS1 maint: numeric names: authors list (link)

External links

History

• "The FORTRAN Automatic Coding System" (1.39 MiB) - 1957 copy describes the design and implementation of the first FORTRAN compiler by the IBM team
• Early Fortran manuals and The very first Fortran manual, by John Backus (6.11 MiB) dated [1956-10-15]
• History of FORTRAN and Systems Manual for 704/ /709 FORTRAN (13.5 MiB)
• FORTRAN at HOPL site
• "The IBM CE Manual for FORTRAN I, II, and 709" from 1959 (3.82 MiB)
• "A History of Language Processor Technology in IBM" (1.45 MiB) - by F.E. Allen, IBM Journal of Research and Development, v.25, no.5, September 1981

Standards

• JTC1/SC22/WG5 - The ISO/IEC Fortran Working Group

Tutorials

• Professional Programmer's Guide to FORTRAN 77 (493 KiB) - Guide written by Clive G. Page of the University of Leicester
• Unit 7.1 FORTRAN 77 and Unit 7.2 Fortran 90 - Part of ASPIRE's "Computational Science Textbook" project
• User Notes on FORTRAN Programming (UNFP) - An open cooperative guide

References

• The Professional Programmer's Guide to FORTRAN 77
• Fortran 90, 95, 2003, 77 Information Resources at Information Services and Systems, King's College London
• Fortran 77 - FORTRAN 77 documentation
• Fortran 77 4.0 Reference Manual (851 KiB)

Code repositories

• Fortran 90 Software Repository - Numerical Algorithms Group
• High-Precision Software Directory - Computational Research Division of Lawrence Berkeley National Laboratory
• National HPCC Software Exchange (defunct) Department of Computer Science at the University of Tennessee at Knoxville
• Netlib Repository at the University of Tennessee at Knoxville and Oak Ridge National Laboratory
• Software from Alan J. Miller Logistic Regression, TOMS algorithms, Special code for F, Applied Statistics Algorithms and NAS compilers

Open source compilers

• GFortran - The GNU Fortran 95 compiler, part of GCC. Distributed as part of GCC as of GCC 4.0. Replaced g77.
• g95 - Free, open source Fortran 95 compiler and runtime libraries
• Open64 - Open Research Compiler. Suite of optimizing compiler development tools for Intel Itanium (Linux)
• Open Watcom - A joint effort between SciTech Software Inc, Sybase and the Open Source development community to maintain Fortran cross compilers and tools

Non-open source compilers

• Intel Fortran Compiler
• Absoft Fortran 95/90/77 and C/C++ compilers for Windows, Mac OS 9 and OS X, Linux IA32 and AMD Opteron and AMD Athlon 64-bit processors
• IBM Fortran 95 compilers for AIX, Blue Gene, and Linux
• Lahey/Fujitsu - Fortran 95 compilers for Linux and Windows
• NAGWare Fortran 95 compiler with 2003 features for Linux, Windows, and Unix on many platforms
• Qlogic Pathscale - Fortran 95, C, and C++ compilers for Linux on AMD Opteron and Intel 64-bit and 32-bit x86 CPUs
• PGI Fortran 95, C and C++ Compilers for 32-bit and 64-bit AMD64 and IA32 processor-based Linux and Windows systems
• Silverfrost (was Salford) - Personal edition (Windows)
• Sun Studio Fortran 95 - From Sun Microsystems; compiles optimized and parallelized code for the Solaris OS on SPARC and x86/x64 platforms, and Linux on x86/x64 platforms

Graphical libraries/GUI

• f90gl - Public domain implementation of the official Fortran 90 bindings for OpenGL (Linux, Mac OS X, Solaris, UNIX, Windows)
• ftcl - A Fortran–Tcl/TK interface
• g2 graphical library - Portable and 2D graphics library (Linux, Mac OS X, OpenVMS, Solaris, UNIX, Windows)GNU LGPL
• GrWin Graphics Library - Free graphics routine library for Fortran (Windows)
• pilib - Platform Independent Library for Fortran 90/95 (Linux, Mac OS X, UNIX, Windows) GNU LGPL
• PLplot - A Scientific Plotting Library (Linux, Mac OS X, MS-DOS, Unix, Windows) GNU LGPL

Testing Frameworks

• FUnit - a unit testing framework.

Miscellaneous

• comp.lang.fortran on Usenet
• Fortran - Open Directory category
• FORTRAN Coding form (41.2 KiB)
• Fortran (G77 and Gfortran) installation and configuration guide for Windows operating system
• Fortran Tutorial Links