Jump to content

Faraday cage

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by 24.62.33.145 (talk) at 00:43, 20 February 2006 (→Faraday's finding). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.
Entrance to a Faraday room

A Faraday cage is an enclosure designed to exclude electromagnetic fields. It is an application of Gauss's law, one of Maxwell's equations. Gauss's law describes the distribution of electrical charge on a conducting form, such as a sphere, a plane, a torus, etc. Intuitively, since like charges repel each other, charge will "migrate" to the surface of the conducting form, as described below. The application is named after physicist Michael Faraday, who built the first Faraday cage in 1836, to demonstrate his finding (see below). Faraday was the experimentalist who described the physical concepts formulated in Maxwell's equations.

Faraday's finding

Faraday stated that the charge on a charged conductor resided only on its exterior, and had no influence on anything enclosed within it. To demonstrate this fact he built a room coated with metal foil, and allowed high-voltage discharges from an electrostatic generator to strike the outside of the room. He used an electroscope to show that there was no electric charge present on the inside of the room's walls.

This shielding effect is used to eliminate electric fields within a volume, for example to protect electronic equipment from lightning strikes and other electrostatic discharges (ESDs).

The same effect was predicted earlier by Francesco Beccaria (1716–1781) at the University of Turin, a student of Benjamin Franklin's work, who stated that "all electricity goes up to the free surface of the bodies without diffusing in their interior substance". Later, the Belgian physicist Louis Melsens (1814–1886) applied the principle to lightning conductors.

The Faraday cage is sometimes known as a Faraday shield. The latter term is also used more generally for any kind of electrostatic shielding.Bold text ''''Bold text'

The idealized Faraday cage

Consider an idealized hollow electrical conductor such as an empty sphere or box.

If the outside of the cage is an idealized conductor, it will form an equipotential surface, that is to say, its surface will have the same electrical potential at every point. If there is no electrical charge inside the box, then by Gauss' law and the divergence theorem, there should be no electrostatic field inside the equipotential surface, regardless of what the field is outside the box.

Since the electrostatic field equations are linear, even field-generating charges in the box will not be affected by any fields outside the box.

How a Faraday cage works

A Faraday cage is best understood as an approximation to an ideal hollow conductor. Electric fields produce forces on the charge carriers (usually electrons) within the conductor. As soon as an electric field is applied to the surface of an ideal conductor, it generates a current that causes displacement of charge inside the conductor that cancels the applied field inside.

Real-world Faraday cages

Faraday cages are often put to a dual purpose: to block electric fields, as explained above, and to block electromagnetic radiation. The latter application is known as RF shielding.

Practical Faraday cages can be made of a conducting mesh instead of a solid conductor. However, this reduces the cage's effectiveness as an RF shield.

Some real-world structures, such as automobiles, behave approximately like a Faraday cage. That's why:

  • If lightning hits near a car, it does not affect the people sitting in the car.
  • If artificial lightning is produced inside a mesh of wires, it does not affect the spectators outside.

Some United States national security buildings are contained in Faraday cages, intended to act as a TEMPEST shield, and possibly also as a mitigation against electromagnetic pulse.

Some traditional architectural materials act as Faraday shields in practice. These include plaster with wire mesh, and rebar concrete. These will affect the use of cordless phones and wireless networks inside buildings and houses.

The door of a microwave oven has a screen built into the glass of the window. From the perspective of microwaves (with wavelengths of 12 cm) this screen finishes a Faraday cage formed by the oven's metal housing. Visible light, with wavelengths around half a micrometer, passes easily between the wires.

See also


Retrieved from "https://en.wikipedia.org/w/index.php?title=Faraday_cage&oldid=40355003"