Jump to content

Flash synchronization

From Wikipedia, the free encyclopedia
This is an old revision of this page, as edited by Egil (talk | contribs) at 11:56, 14 March 2003 (Possible, but not usual). The present address (URL) is a permanent link to this revision, which may differ significantly from the current revision.

In a camera, flash synchronization is required for the firing of a photographic flash to coincide with the shutter admitting light to the photographic film.

The synchronization mechanism usually consists of an electrical contact within the shutter mechanism. The electrical connection will be either by means of a cable with a standardised coaxial connector, or via contacts in the accessory mount bracket.

X synchronization is when the timing of the contact coincides exactly with the opening of the shutter. This is required for Xenon flash. Note that due to their construction, focal plane shutters as used on most SLRs will only allow Xenon flash units to be used at shutter speeds were the entire film is open at once, typically at shutter speeds of 1/60 (sometimes 1/125) or slower.

For (now archaic) flash bulbs, the contact may need to close earlier to allow the shutter to open at the moment of full light intensity.

The first camera to implement a flash synchronizer was the Exakta, in 1935.

Retrieved from "https://en.wikipedia.org/w/index.php?title=Flash_synchronization&oldid=746495"