MP 40

Maschinenpistole 40 (MP40)
MP40
Type	Submachine gun
Place of origin	Germany
Service history
In service	1939-1945
Used by	Nazi Germany, Israel
Wars	Second World War
Production history
Designer	Heinrich Vollmer
Designed	1938
Manufacturer	Erma Werke
Produced	1940-1945
No. built	Approx. 1 million
Variants	MP36, MP38, MP40, MP40/1, MP41
Specifications
Mass	Template:Kg to lb
Length	Template:Mm to in Template:Mm to in w/stock folded
Barrel length	Template:Mm to in
Cartridge	9x19mm Parabellum
Action	blowback, open bolt
Rate of fire	500 rounds/min
Muzzle velocity	~380 m/s (1,247 ft/s)
Effective firing range	100 m (110 yd)
Maximum firing range	200 m (220 yd)
Feed system	32-round detachable box magazine
Sights	Hooded blade front, fixed and flip-up U-notch rear

The MP40 (Maschinenpistole 40, literally "machine pistol 40") is a submachine gun developed in Germany and used extensively by paratroopers and platoon and squad leaders, and other troops during World War II. The MP40 had a relatively low rate of fire and low recoil, which made it more manageable than other contemporary submachine guns.

History

The MP40 is descended from the MP36, prototype made of machined steel, of which only two examples remain. The MP36 prototype was developed independently by Erma's Berthold Geipel with funding of the German army. It was based on Heinrich Vollmer's VPM 1930 and EMP. Vollmer then worked on Berthold Geipel's MP 36 and submitted in 1938 a prototype to answer a request from the German Armament services for a new submachine gun. It was adopted as MP38. The MP38 was a simplification of the MP36, as the MP40 was later a simplification of the MP38, the differences being in cost-saving alterations, especially the use of more pressed rather than machined parts.

The changes resulted from experiences with the several thousand MP38s in service since 1939, used during the invasion of Poland. The changes were incorporated into an intermediate version, the MP38/40, and then used in the initial MP40 production version. Just over 1 million would be made of all versions in the course of the war.

The MP40 was often called the 'Schmeisser' by the Allies, after weapons designer Hugo Schmeisser.Hugo Schmeisser himself did not design the MP40 but held a patent on the magazine, He designed the MP41 which was a MP40 with an old-fashioned wooden rifle stock and a selector. the MP 41 was not a service weapon in Germany.

Design

MP 40 extended stock

MP 40 folded stock

Both MP38 and MP40 submachine guns are open bolt blowback operated automatic arms. Fully automatic fire was the only setting, but the relatively low rate of fire allowed for single shots with controlled trigger pulls. The bolt features a telescoped return spring guide which serves as a pneumatic recoil buffer. The cocking handle was permanently attached to the bolt on early MP38s but on late production MP38s and MP40s, the bolt handle was made as a separate part. It also served as a safety by pushing the head of handle into a separate notches above the main opening which locked the bolt either in the cocked or forward position. The absence of this feature on early MP38s resulted in field expedients such as leather harnesses with a small loop, used to hold the bolt in forward position.

The receiver was originally machined steel but this was a time consuming and expensive process. This prompted the development of a simpler version which used stamped steel and electro-spot welding as much as possible. The MP38 also features longitudinal grooving on the receiver and bolt, as well as a circular opening on the magazine housing. These features were suppressed on the M38/40 and MP40.

One idiosyncratic and visible feature on most MP38 and MP40 submachine guns was an aluminum or plastic rail under the barrel which was used as a support when firing over the side of open top armored personnel carriers such as the Sdkfz 251 half-track. A handguard was located between the magazine housing and pistol grip and was made of synthetic material derived from bakelite. The barrel lacked any form of insulation, which often resulted in burns for the supporting hand if it strayed. It also had a folding stock, the first for a submachine gun, resulting in a shorter weapon when folded, but it was insufficiently durable for hard use and hand-to-hand combat.

Though the MP40 was generally reliable, a major weak point was its 32-round magazine. Unlike the Thompson's double-column, dual-feed magazine, the MP38 and MP40 used a single-feed design. The main cause of malfunction is that the magazine was also frequently misused as a handhold, which could also cause a failure to feed when hand pressure on the magazine body caused the feed lips to move out of position since the magazine well did not keep the magazine firmly locked like on a Sten. German soldiers were trained to grasp either the intended handhold on the underside of the weapon or the magazine housing with the supporting hand to avoid feed malfunctions.

Unlike the impression given by popular culture, MP40s were generally issued only to paratroopers and platoon and squad leaders; the majority of soldiers carried Karabiner 98k rifles. However, experience with Soviet tactics where entire units armed with submachine guns out-gunned their German counterparts in short range urban combat caused a shift in tactics, and by the end of the war it was being issued to entire assault platoons on a limited basis.

There were never enough MP40s because raw material resources and labor cost made it expensive to produce as well as the K 98 rifles hence the move from 1943 to replace both by a new class of weapons the MP 43/ MP 44 in German denomination also known as StG 44.

Despite general belief, the MP40 is more accurate than the Sten.

Copies and post-war usage

The MP38 or MP40 was a pattern for diverse submachine guns such as:

• As the design of the M3 submachine gun started, the designers looked at Sten guns and captured MP40s.

• The Ukrainian Insurgent Army (UPA) used large quantities of the MP40 in the liberation war against the Soviets between 1944 and 1956 in Western Ukraine.

• The German semi-automatic copy of the MP38, Selbstladebüchse BD-38 (since 2005).

• The Spanish company Star Bonifacio Echeverria, S.A. produced several variants as follows:

File:SUBFUSILSTARZ-45,TRASERA,CARGADOR,DCHA.jpg

Star Model Z-45

• • Star Model Z-45 model : Produced in 9mm Largo and contains parts of wood (butt and hand guards) and is a version of folding stock similar to the German MP40 and the magazine carried 30 rounds. It served in Spain, Cuba, Chile, Portugal and Saudi Arabia and was used for the first time in combat in the battle of Sidi Ifni.
  • Star Model Z-62 and Z-63 : A much modified variant which entered production in 1963 in good condition and its more well-known difference is than the Z-62 uses the 9 ammunition of length and the Z-63 the ammunition of 9mm Parabellum. They have differences of internal design but by outside they are practically identical. There are parts of no wood and are completely metal. resembles more the Beretta MAB.
  • Star Model Z-70 and Z-70B : Similar in appearance to the Z-62 but with a modified safety, the caliber is in 9mm Parabellum after the entrance of Spain in NATO and both models incorporate the shipper of 30 firings.

• The Yugoslav Peoples Army produced a variant in 7.62x25mm Tokarev called the M56 which were used in some quantity in the various conflicts in the breakup of Yugoslavia. It was recognized by its long thin barrel and curved magazines.

• The Norwegian Army used the MP40 from 1945 until about 1970 and other parts of the Norwegian armed forces, such as the Norwegian Home Guard, still issued the MP40 up into the very early 90s.

• After the war the MP40 was still the standard submachine gun of the Israeli army and was often used in the Palestinian area. It remained the official submachine gun of the Israeli paratroopers until 1956.

• Some MP40s were in use by the Kosovo Liberation Army in the Kosovo War in 1999 [1].

Two MP40's were used by the LAPD SWAT team during the famous May 1974 shootout with members of the terrorist Symbionese Liberation Army.[2]

Variants and developments

• MP40/I - main production version
• MP40/II - experiment with two side by side 32-round magazines. The MP40/II was tested in 1942. This version of the MP40 has a two-magazine receiver that slides horizontally to use the additional magazine when the first becomes depleted. This design was intended to counter the superior firepower of the Russian PPSh-41, but made the weapon heavy and unbalanced in the field, and did not work well.. However, by 1943 the Soviets shifted the production of PPSh-41 drums to 35 round magazines to combat malfunctions.
• MP41: A variant designed by Louis Schmeisser for the Haenel Company, which featured the receiver, operating mechanism, and magazine housing of the MP40 and the stock, trigger and fire selector similar to the MP28.
• Many countries involved in World War II developed submachine guns which had a similar features to the MP40 (with a folding stock, magazine as a front handgrip, and production techniques). The most famous examples are the Russian PPS-43 and the American M3 submachine gun. Most derivative designs also copied the troublesome magazine design as well.
• BD38 - a new semi-automatic reproduction of the MP38 submachinegun

See also

• MP18
• List of submachine guns
• List of common World War II infantry weapons
• List of World War II firearms of Germany

Bibliography

• The German Submachine Guns (downloadable) by Lyndon Haywood (H&L Publishing - HLebooks.com - 2001)

External links

• Video of comparison tests between the MP40 and Sten gun
• Small Arms Review: The MP36 The Missing Link
• Polish MP-38 / 40 site
• MP40 schematics
• BD38 Page
• Gunworld article on the MP40
• Gunworld article on the Yugoslav M56