This article needs additional citations for verification. (December 2018)
The neper (symbol: Np) is a logarithmic unit for ratios of measurements of physical field and power quantities, such as gain and loss of electronic signals. The unit's name is derived from the name of John Napier, the inventor of logarithms. As is the case for the decibel and bel, the neper is a unit defined in the international standard ISO 80000. It is not part of the International System of Units (SI), but is accepted for use alongside the SI.
Like the decibel, the neper is a unit in a logarithmic scale. While the bel uses the decadic (base-10) logarithm to compute ratios, the neper uses the natural logarithm, based on Euler's number (e ≈ 2.71828). The level a ratio of two signal amplitudes or root-power quantities, with the unit neper, is given by
where and are the signal powers.
The neper is defined in terms of ratios of field quantities — also called root-power quantities — (for example, voltage or current amplitudes in electrical circuits, or pressure in acoustics), whereas the decibel was originally defined in terms of power ratios. A power ratio 10 log r dB is equivalent to a field-quantity ratio 20 log r dB, since power in a linear system is proportional to the square (Joule's laws) of the amplitude. Hence the decibel and the neper have a fixed ratio to each other:
The (voltage) level ratio is
The neper is a natural linear unit of relative difference, meaning in nepers (logarithmic units) relative differences add rather than multiply. This property is shared with logarithmic units in other bases, such as the bel.
The derived units decineper (1 dNp = 0.1 neper) and centineper (1 cNp = 0.01 neper) are also used. The centineper for root-power quantities corresponds to a log point or log percentage, see Relative change and difference § Logarithmic scale.
- The International System of Units (SI) (9 ed.). International Bureau of Weights and Measures. 2019. pp. 145–146. Archived from the original on 2022-10-09.
- Letter symbols to be used in electrical technology – Part 3: Logarithmic and related quantities, and their units (International standard). International Electrotechnical Commission. 2002-07-19. IEC 60027-3:2002.
- Thor, A. J. (1994). New International Standards for Quantities and Units. Metrologia, 30(5), 517.
- Ainslie, Michael A.; Halvorsen, Michele B.; Robinson, Stephen P. (January 2022) [2021-11-09]. "A terminology standard for underwater acoustics and the benefits of international standardization". IEEE Journal of Oceanic Engineering. IEEE. 47 (1): 179-200 [Appendix B Decibel: Past, Present, and Future – Section D]. eISSN 1558-1691. ISSN 0364-9059. Retrieved 2022-12-20.  (22 pages)
- ISO 80000-3:2007 §0.5
- Glossary of Telecommunication Terms. General Services Administration, Federal Supply Service. 1980. p. 73.
- Karjus, Andres; Blythe, Richard A.; Kirby, Simon; Smith, Kenny (10 February 2020). "Quantifying the dynamics of topical fluctuations in language". Language Dynamics and Change. 10 (1): 86–125. doi:10.1163/22105832-01001200. S2CID 46928080.
- Mirifici logarithmorum canonis constructio (in French). Paris: Librairie scientifique Hermann et C.ie. 1825.
- Tuffentsammer, Karl (1956). "Das Dezilog, eine Brücke zwischen Logarithmen, Dezibel, Neper und Normzahlen" [The decilog, a bridge between logarithms, decibel, neper and preferred numbers]. VDI-Zeitschrift (in German). 98: 267–274.
- Paulin, Eugen (2007-09-01). Logarithmen, Normzahlen, Dezibel, Neper, Phon - natürlich verwandt! [Logarithms, preferred numbers, decibel, neper, phon - naturally related!] (PDF) (in German). Archived (PDF) from the original on 2016-12-18. Retrieved 2016-12-18.