|Named after||James Watt|
|1 W in ...||... is equal to ...|
|SI base units||1 kg⋅m2⋅s−3|
|CGS units||107 erg⋅s−1|
|English Engineering Units||0.7375621 ft⋅lbf/s = 0.001341022 hp|
The watt (symbol: W) is the unit of power or radiant flux in the International System of Units (SI), equal to 1 joule per second or 1 kg⋅m2⋅s−3. It is used to quantify the rate of energy transfer. The watt is named after James Watt (1736–1819), an 18th-century Scottish inventor, mechanical engineer, and chemist who improved the Newcomen engine with his own steam engine in 1776. Watt's invention was fundamental for the Industrial Revolution.
In terms of electromagnetism, one watt is the rate at which electrical work is performed when a current of one ampere (A) flows across an electrical potential difference of one volt (V), meaning the watt is equivalent to the volt-ampere (the latter unit, however, is used for a different quantity from the real power of an electrical circuit).
- A person having a mass of 100 kg who climbs a 3-metre-high ladder in 5 seconds is doing work at a rate of about 600 watts. Mass times acceleration due to gravity times height divided by the time it takes to lift the object to the given height gives the rate of doing work or power.[i]
- A labourer over the course of an eight-hour day can sustain an average output of about 75 watts; higher power levels can be achieved for short intervals and by athletes.
Origin and adoption as an SI unit
The watt is named after the Scottish inventor James Watt. The unit name was proposed initially by C. William Siemens in August 1882 in his President's Address to the Fifty-Second Congress of the British Association for the Advancement of Science. Noting that units in the practical system of units were named after leading physicists, Siemens proposed that watt might be an appropriate name for a unit of power. Siemens defined the unit consistently within the then-existing system of practical units as "the power conveyed by a current of an Ampère through the difference of potential of a Volt".
In October 1908, at the International Conference on Electric Units and Standards in London, so-called "international" definitions were established for practical electrical units. Siemens' definition was adopted as the "international" watt. (Also used: 1 A2 × 1 Ω.) The watt was defined as equal to 107 units of power in the "practical system" of units. The "international units" were dominant from 1909 until 1948. After the 9th General Conference on Weights and Measures in 1948, the "international" watt was redefined from practical units to absolute units (i.e., using only length, mass, and time). Concretely, this meant that 1 watt was now defined as the quantity of energy transferred in a unit of time, namely 1 J/s. In this new definition, 1 "absolute" watt = 1.00019 "international" watts. Texts written before 1948 are likely to be using the "international" watt, which implies caution when comparing numerical values from this period with the post-1948 watt. In 1960, the 11th General Conference on Weights and Measures adopted the "absolute" watt into the International System of Units (SI) as the unit of power.
- The sound intensity in water corresponding to the international standard reference sound pressure of 1 μPa is approximately 0.65 aW/m2.
- Powers that are measured in femtowatts are typically found in references to radio and radar receivers. For example, meaningful FM tuner performance figures for sensitivity, quieting and signal-to-noise require that the RF energy applied to the antenna input be specified. These input levels are often stated in dBf (decibels referenced to 1 femtowatt). This is 0.2739 microvolts across a 75-ohm load or 0.5477 microvolt across a 300-ohm load; the specification takes into account the RF input impedance of the tuner.
- Powers that are measured in picowatts are typically used in reference to radio and radar receivers, acoustics and in the science of radio astronomy. One picowatt is the international standard reference value of sound power when this quantity is expressed as a level in decibels.
- Powers that are measured in nanowatts are also typically used in reference to radio and radar receivers.
- Powers that are measured in microwatts are typically stated in medical instrumentation systems such as the electroencephalograph (EEG) and the electrocardiograph (ECG), in a wide variety of scientific and engineering instruments and also in reference to radio and radar receivers. Compact solar cells for devices such as calculators and watches are typically measured in microwatts.
- A typical laser pointer outputs about five milliwatts of light power, whereas a typical hearing aid uses less than one milliwatt. Audio signals and other electronic signal levels are often measured in dBm, referenced to one milliwatt.
- The kilowatt is typically used to express the output power of engines and the power of electric motors, tools, machines, and heaters. It is also a common unit used to express the electromagnetic power output of broadcast radio and television transmitters. One kilowatt is approximately equal to 1.34 horsepower. A small electric heater with one heating element can use 1 kilowatt. The average electric power consumption of a household in the United States is about 1 kilowatt.[ii] A surface area of 1 square metre on Earth receives typically about one kilowatt of sunlight from the Sun (the solar irradiance) (on a clear day at midday, close to the equator).
- Many events or machines produce or sustain the conversion of energy on this scale, including large electric motors; large warships such as aircraft carriers, cruisers, and submarines; large server farms or data centers; and some scientific research equipment, such as supercolliders, and the output pulses of very large lasers. A large residential or commercial building may use several megawatts in electric power and heat. On railways, modern high-powered electric locomotives typically have a peak power output of 5 or 6 MW, while some produce much more. The Eurostar e300, for example, uses more than 12 MW, while heavy diesel-electric locomotives typically produce and use 3 and 5 MW. U.S. nuclear power plants have net summer capacities between about 500 and 1300 MW.: 84–101 The earliest citing of the megawatt in the Oxford English Dictionary (OED) is a reference in the 1900 Webster's International Dictionary of the English Language. The OED also states that megawatt appeared in a 28 November 1947 article in the journal Science (506:2).
- A gigawatt is typical average power for an industrial city of one million habitants and also the output of a large power station. The GW unit is thus used for large power plants and power grids. For example, by the end of 2010, power shortages in China's Shanxi province were expected to increase to 5–6 GW and the installation capacity of wind power in Germany was 25.8 GW. The largest unit (out of four) of the Belgian Doel Nuclear Power Station has a peak output of 1.04 GW. HVDC converters have been built with power ratings of up to 2 GW.
- The primary energy used by humans worldwide was about 160,000 terawatt-hours in 2019, corresponding to an average continuous power consumption of 18 TW that year. The most powerful lasers from the mid-1960s to the mid-1990s produced power in terawatts, but only for nanosecond intervals. The average lightning strike peaks at 1 TW, but these strikes only last for 30 microseconds.
- A petawatt can be produced by the current generation of lasers for time scales on the order of picoseconds. One such laser is the Lawrence Livermore's Nova laser, which achieved a power output of 1.25 PW by a process called chirped pulse amplification. The duration of the pulse was roughly 0.5 ps, giving a total energy of 600 J. Another example is the Laser for Fast Ignition Experiments (LFEX) at the Institute of Laser Engineering (ILE), Osaka University, which achieved a power output of 2 PW for a duration of approximately 1 ps. Based on the average total solar irradiance of 1.361 kW/m2, the total power of sunlight striking Earth's atmosphere is estimated at 174 PW. The planet's average rate of global warming, measured as Earth's energy imbalance, reached about 0.5 PW (0.3% of incident solar power) by 2019.
- The power output of the Sun is 382.8 YW.
Conventions in the electric power industry
In the electric power industry, megawatt electrical (MWe or MWe) refers by convention to the electric power produced by a generator, while megawatt thermal or thermal megawatt (MWt, MWt, or MWth, MWth) refers to thermal power produced by the plant. For example, the Embalse nuclear power plant in Argentina uses a fission reactor to generate 2109 MWt (i.e. heat), which creates steam to drive a turbine, which generates 648 MWe (i.e. electricity). (See Betz's law for the associated efficiency.) Other SI prefixes are sometimes used, for example gigawatt electrical (GWe). The International Bureau of Weights and Measures, which maintains the SI-standard, states that further information about a quantity should not be attached to the unit symbol but instead to the quantity symbol (i.e., Pthermal = 270 W rather than P = 270 Wth) and so these units are non-SI. In compliance with SI, the energy company Ørsted A/S uses the unit megawatt for produced electrical power and the equivalent unit megajoule per second for delivered heating power in a combined heat and power station such as Avedøre Power Station.
When describing alternating current (AC) electricity, another distinction is made between the watt and the volt-ampere. While these units are equivalent for simple resistive circuits, they differ when loads exhibit electrical reactance.
Radio stations usually report the power of their transmitters in units of watts, referring to the effective radiated power. This refers to the power that a half-wave dipole antenna would need to radiate to match the intensity of the transmitter's main lobe.
Distinction between watts and watt-hours
The terms power and energy are closely related but distinct physical quantities. Power is the rate at which energy is generated or consumed and hence is measured in units (e.g. watts) that represent energy per unit time.
For example, when a light bulb with a power rating of 100W is turned on for one hour, the energy used is 100 watt hours (W·h), 0.1 kilowatt hour, or 360 kJ. This same amount of energy would light a 40-watt bulb for 2.5 hours, or a 50-watt bulb for 2 hours.
Power stations are rated using units of power, typically megawatts or gigawatts (for example, the Three Gorges Dam in China, is rated at approximately 22 gigawatts). This reflects the maximum power output it can achieve at any point in time. A power station's annual energy output, however, would be recorded using units of energy (not power), typically gigawatt hours. Major energy production or consumption is often expressed as terawatt hours for a given period; often a calendar year or financial year. One terawatt hour of energy is equal to a sustained power delivery of one terawatt for one hour, or approximately 114 megawatts for a period of one year:
- Power output = energy / time
- 1 terawatt hour per year = 1×1012 W·h / (365 days × 24 hours per day) ≈ 114 million watts,
equivalent to approximately 114 megawatts of constant power output.
- Kibble balance (formerly known as a watt balance)
- Nominal power (photovoltaic)
- Power factor
- Solar constant
- Wattage conversion factors
- The energy in climbing the stairs is given by mgh. Setting m = 100 kg, g = 9.8 m/s2 and h = 3 m gives 2940 J. Dividing this by the time taken (5 s) gives a power of 588 W.
- Average household electric power consumption is 1.19 kW in the US, 0.53 kW in the UK. In India it is 0.13 kW (urban) and 0.03 kW (rural) – computed from GJ figures quoted by Nakagami, Murakoshi and Iwafune.
- Watts per hour refers to the rate of change of power being used (or generated). For example, a power plant that changes its power output from 100 MW to 200 MW in 15 minutes would have a ramp-up rate of 400 MW/h. Gigawatts per hour are used to characterize the ramp-up required of the power plants on an electric grid to compensate for loss of output from other sources, such as when solar power generation drops to zero as the sun sets. See duck curve.
- Newell, David B; Tiesinga, Eite (2019). The international system of units (SI): (PDF) (Report). Gaithersburg, MD: National Institute of Standards and Technology. doi:10.6028/nist.sp.330-2019. §2.3.4, Table 4.
- Yildiz, I.; Liu, Y. (2018). "Energy units, conversions, and dimensional analysis". In Dincer, I. (ed.). Comprehensive energy systems. Vol 1: Energy fundamentals. Elsevier. pp. 12–13. ISBN 9780128149256.
- International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), pp. 118, 144, ISBN 92-822-2213-6, archived (PDF) from the original on 2021-06-04, retrieved 2021-12-16
- Avallone, Eugene A; et al., eds. (2007), Marks' Standard Handbook for Mechanical Engineers (11th ed.), New York: Mc-Graw Hill, pp. 9–4, ISBN 978-0-07-142867-5.
- Klein, Herbert Arthur (1988) . The Science of measurement: A historical survey. New York: Dover. p. 239. ISBN 9780486144979.
- "Address by C. William Siemens". Report of the Fifty-Second meeting of the British Association for the Advancement of Science. Vol. 52. London: John Murray. 1883. pp. 1–33.
- Siemens supported his proposal by asserting that Watt was the first who "had a clear physical conception of power, and gave a rational method for measuring it." "Siemens, 1883, p. 6"
- "Siemens", 1883, p. 5"
- Tunbridge, P. (1992). Lord Kelvin: His Influence on Electrical Measurements and Units. Peter Peregrinus: London. p. 51. ISBN 0-86341-237-8.
- Fleming, John Ambrose (1911). . In Chisholm, Hugh (ed.). Encyclopædia Britannica. Vol. 27 (11th ed.). Cambridge University Press. pp. 738–745, see page 742.
- "Resolution 12 of the 11th CGPM (1960)". Bureau International des Poids et Mesures (BIPM). Retrieved 9 April 2018.
- Ainslie, M. A. (2015). A century of sonar: Planetary oceanography, underwater noise monitoring, and the terminology of underwater sound. Acoustics Today.
- Morfey, C.L. (2001). Dictionary of Acoustics.
- "Bye-Bye Batteries: Radio Waves as a Low-Power Source", The New York Times, Jul 18, 2010, archived from the original on 2017-03-21.
- Stetzler, Trudy; Magotra, Neeraj; Gelabert, Pedro; Kasthuri, Preethi; Bangalore, Sridevi. "Low-Power Real-Time Programmable DSP Development Platform for Digital Hearing Aids". Datasheet Archive. Archived from the original on 3 March 2011. Retrieved 8 February 2010.
- Nakagami, Hidetoshi; Murakoshi, Chiharu; Iwafune, Yumiko (2008). International Comparison of Household Energy Consumption and Its Indicator (PDF). ACEEE Summer Study on Energy Efficiency in Buildings. Pacific Grove, California: American Council for an Energy-Efficient Economy. Figure 3. Energy Consumption per Household by Fuel Type. 8:214–8:224. Archived (PDF) from the original on 9 January 2015. Retrieved 14 February 2013.
- Elena Papadopoulou, Photovoltaic Industrial Systems: An Environmental Approach, Springer 2011 ISBN 3642163017, p.153
- "Appendix A | U.S. Commercial Nuclear Power Reactors" (PDF). 2007–2008 Information Digest (Report). Vol. 19. United States Nuclear Regulatory Commission. 1 August 2007. pp. 84–101. Archived from the original (PDF) on 16 February 2008. Retrieved 27 December 2021.
- Bai, Jim; Chen, Aizhu (11 November 2010). Lewis, Chris (ed.). "China's Shanxi to face 5–6 GW power shortage by yr-end – paper". Peking: Reuters.
- "Not on my beach, please". The Economist. 19 August 2010. Archived from the original on 24 August 2010.
- "Chiffres clés" [Key numbers]. Electrabel. Who are we: Nuclear (in French). 2011. Archived from the original on 2011-07-10.
- Davidson, CC; Preedy, RM; Cao, J; Zhou, C; Fu, J (October 2010), "Ultra-High-Power Thyristor Valves for HVDC in Developing Countries", 9th International Conference on AC/DC Power Transmission, London: IET.
- Hannah Ritchie and Max Roser (2020). "Global Direct Primary Energy Consumption". Our World in Data. Published online at OurWorldInData.org. Retrieved 2020-02-09.
- "Crossing the Petawatt threshold". Livermore, CA: Lawrence Livermore National Laboratory. Archived from the original on 15 September 2012. Retrieved 19 June 2012.
- World's most powerful laser: 2 000 trillion watts. What's it?, IFL Science, archived from the original on 2015-08-22.
- Eureka alert (publicity release), Aug 2015, archived from the original on 2015-08-08.
- "Construction of a Composite Total Solar Irradiance (TSI) Time Series from 1978 to present". CH: PMODWRC. Archived from the original on 2011-08-30. Retrieved 2005-10-05.
- Loeb, Norman G.; Johnson, Gregory C.; Thorsen, Tyler J.; Lyman, John M.; et al. (15 June 2021). "Satellite and Ocean Data Reveal Marked Increase in Earth's Heating Rate". Geophysical Research Letters. 48 (13). Bibcode:2021GeoRL..4893047L. doi:10.1029/2021GL093047.
- Williams, Dr. David R. "Sun Fact Sheet". nasa.gov. NASA. Retrieved 26 February 2022.
- Rowlett, Russ. "How Many? A Dictionary of Units of Measurement. M". University of North Carolina at Chapel Hill. Archived from the original on 2011-09-04. Retrieved 2017-03-04.
- Cleveland, CJ (2007). "Watt". Encyclopedia of Earth.
- "Solar Energy Grew at a Record Pace in 2008 (excerpt from EERE Network News". US: Department of Energy). 25 March 2009. Archived from the original on 18 October 2011.
- International Bureau of Weights and Measures (2006), The International System of Units (SI) (PDF) (8th ed.), p. 132, ISBN 92-822-2213-6, archived (PDF) from the original on 2021-06-04, retrieved 2021-12-16
- "Avedøre Power Station (Avedøre værket)". DONG Energy. Archived from the original on 2014-03-17. Retrieved 2014-03-17.
- "Inverter Selection". Northern Arizona Wind and Sun. Archived from the original on 1 May 2009. Retrieved 27 March 2009.
- Borvon, Gérard. "History of the electrical units".
- Nelson, Robert A. (February 2000). The International System of Units: Its History and Use in Science and Industry. Via Satellite. ATI courses.